Use & Care Guide Bottom Freezer Refrigerator TM Model: 795.7431* - PreView Grab-N-Go Model: 795.7430* - Standard Door * = color number MFL69497028_Rev. 00 Sears Brands Management Corporation Hoffman Estates, IL 60179 U.S.A. www.kenmore.
TABLE OF CONTENTS Warranty............................................................................. 3 Important Safety Instructions............................ 5-7 Extra Ice Bin .................................................. 32 Electrical & Grounding Requirements............... 7 Pullout Drawer ............................................... 33 Parts and Features....................................................8-9 Durabase.........................................................
Warranty REFRIGERATOR WARRANTY KENMORE ELITE LIMITED WARRANTY WITH PROOF OF SALE, the following warranty coverage applies when this appliance is correctly installed, operated and maintained according to all supplied instructions. One Year on Appliance FOR ONE YEAR from the date of sale this appliance is warranted against defects in material or workmanship. A defective appliance will receive free repair or replacement at option of seller.
PRODUCT RECORD In the space below, record the date of purchase, model and serial number of your product. You will find the model and serial number printed on an identification label located on the interior liner of the refrigerator compartment. Have these items of information available whenever you contact Sears concerning your product. Model No.___________________ Date of Purchase ___________________ Serial No.
Important Safety Instructions BASIC SAFETY PRECAUTIONS This guide contains many important safety messages. Always read and obey all safety messages. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product. All safety messages will be preceded by the safety alert symbol and the hazard signal word DANGER, WARNING or CAUTION.
WARNING • Before replacing a burned-out or broken light bulb, unplug the refrigerator or turn off power at the circuit breaker or fuse box in order to avoid contact with a live wire filament. (A burned-out light bulb may break when being replaced exposing the wire filament.) • • • • • DO NOT touch the automatic ice making mechanism while the refrigerator is plugged in. • DO NOT refreeze frozen foods which have thawed completely.
CFC/HCFC DISPOSAL Your old refrigerator may have a cooling system that used CFCs or HCFCs (chlorofluorocarbons or hydrochlorofluorocarbons). CFCs and HCFCs are believed to harm stratospheric ozone if released to the atmosphere. Other refrigerants may also cause harm to the environment if released to the atmosphere. If you are throwing away your old refrigerator, make sure the refrigerant is removed for proper disposal by a qualified technician.
Parts and Features • Standard Door A K L B M C N O D E P F E C P Q G H R I S T J U • PreView Grab-N-Go A K L B M C O D V E W F C Q G S H T I J U 8
PARTS AND FEATURES Use this page to become more familiar with the parts and features of your refrigerator. NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the items listed below. The locations of the features shown below may not match your model.
Refrigerator Installation WARNING WARNING Excessive Weight Hazard: Excessive Weight Hazard: Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator when trying to move it, as floor damage could occur. Use two or more people to move and install the refrigerator. Failure to do so can result in back or other injury.
REFRIGERATOR INSTALLATION INSTALLATION (continued) PRIOR TO USE 1. Clean your refrigerator thoroughly and wipe off all dust that accumulated during shipping. 1. To avoid noise and vibration, the unit must be leveled and installed on a solidly constructed floor. If required, adjust the leveling legs to compensate for unevenness of the floor. The front should be slightly higher than the rear to aid in door closing. Leveling legs can be turned easily by tipping the cabinet slightly.
REFRIGERATOR INSTALLATION NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow opening. If it is necessary to remove the handles, follow the directions below. HOW TO REMOVE REFRIGERATOR DOOR HANDLE NOTE: Handle appearance may vary from the illustrations on this page. Mounting Fasteners Set Screw Removing Refrigerator Handle Loosen the set screws with a 3/32 in. Allen wrench and remove the handle.
REFRIGERATOR INSTALLATION NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow opening. If it is necessary to remove the handles, follow the directions below. HOW TO REMOVE FREEZER DOOR HANDLE NOTE: Handle appearance may vary from the illustrations on this page. Removing Freezer Drawer Handle Loosen the set screws located on the lower side of the handle with a ⅛ in. Allen wrench and remove the handle.
REFRIGERATOR INSTALLATION REMOVING AND REPLACING REFRIGERATOR DOORS CAUTION: Before you begin, remove food and bins from the doors. (1) (2) WARNING Excessive Weight Hazard: Use two or more people to remove and install the refrigerator doors. Failure to do so can result in back or other injury. (3) (4) (5) (6) (7) WARNING Electrical Shock Hazard (8) 1. Open the door. Remove the top hinge cover screw (1). Lift up the cover (2). 2. Remove the cover. 3. Pull out the tube (3). 4.
REFRIGERATOR INSTALLATION Reinstalling the Refrigerator Door Left Door Right Door 1. Lower the door onto the middle hinge pin (9). 2. Fit the top hinge (4) over the hinge lever latch (5) and into place. Rotate the lever (3) counterclockwise to secure the hinge. 3. Hook the tabs on the right side of hinge cover (2) under the edge of the top hinge (4) and position the cover in place. Insert and tighten the cover screw (1). 1. Lower the door onto the middle hinge pin (10). 2.
REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION HOW TO REMOVE THE FREEZER DRAWER HOW HOWTO TOREMOVE REMOVETHE THEFREEZER FREEZERDRAWER DRAWER HOW TO INSTALL THE FREEZER DRAWER WARNING: Use two or more people to remove and WARNING: Use orormore WARNING: Usetwo two more people toremove remove install the freezer drawer. Failure topeople do so to can result and inand installthe thefreezer freezerdrawer. drawer.
REFRIGERATOR INSTALLATION LEVELING AND DOOR ALIGNMENT 2. Open both doors again and check to make sure that they close easily. If the doors do not close easily, tilt the refrigerator slightly more to the rear by turning both leveling legs to the left. It may take several more turns, and you should turn both leveling legs the same amount. Leveling After installing, plug the refrigerator’s power cord into a 3-prong grounded outlet and push the refrigerator into the final position.
USING YOUR REFRIGERATOR SETTING THE CONTROLS Temperature • The Refrigerator Temp Control ranges from 33°F to 46°F (1°C to 8°C). Press the refrigerator temp button to cycle through the available temperature settings one increment at a time. • The Freezer Temp Control range is from -6°F to 8°F (-21°C to -13°C). Press the freezer temp button to cycle through the available temperature settings one increment at a time. NOTE: When changing control settings, wait 24 hours before making additional adjustments.
USING YOUR REFRIGERATOR Dispenser Light Air Filter This light has three settings: On, Off and Dim. Select the Dim option at night. The light will automatically turn on at full brightness when the dispenser pad is pushed. The Air Filter helps remove odors from the refrigerator. The Air Filter has two settings, Auto and Max. In Auto mode, the Air Filter will cycle on and off in increments of ten minutes on and one hundred and ten minutes off.
USING YOUR REFRIGERATOR Door Alarm Demo Mode (For Store Use Only) The Demo Mode disables all cooling in the refrigerator and freezer sections to conserve energy while on display in a retail store. When activated, OFF will display on the control panel. • When power is connected to the refrigerator, the door alarm is initially set to ON. When you press the Door Alarm button, the display will change to OFF and the Door Alarm function will deactivate.
USING YOUR REFRIGERATOR SMART FEATURES DEFINITIONS OVERVIEW Kenmore Smart connectivity transforms your relationship with your home. You can personalize the way Kenmore Smart products operate based on your schedule and daily routines, making life easier and providing greater peace of mind. It does this by letting you link with and manage your Kenmore Smart products on one app, all from trusted brands, from a smart phone, tablet or computer.
USING YOUR REFRIGERATOR INSTRUCTIONS FOR SMART GRID IMPORTANT: You must connect your Kenmore Smart appliance to the internet and then register the appliance to your account in order to use the Smart Grid function. Consult the Quick Start Guide supplied with the appliance for instructions on how to register your appliance using the Kenmore Smart application (app).
USING YOUR REFRIGERATOR FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.
USING YOUR REFRIGERATOR IN-DOOR ICE BIN CAUTION Keep hands and tools out of the ice compartment door and dispenser chute. Failure to do so may result in damage or personal injury. 2. To remove the in-door ice bin, grip the front handle, slightly lift the lower part, and slowly pull out the bin as shown. The icemaker will stop producing ice when the in-door ice bin is full. If you need more ice, empty the ice bin into the extra ice bin in the freezer compartment.
USING YOUR REFRIGERATOR AUTOMATIC ICEMAKER Ice is made in the automatic icemaker and sent to the dispenser. The icemaker will produce 70-182 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other operating conditions. WARNING Personal Injury Hazard DO NOT place fingers or hands on the automatic ice making mechanism while the refrigerator is plugged in.
USING YOUR REFRIGERATOR AUTOMATIC ICEMAKER (continued) CAUTION WHEN TO SET ICEMAKER TO OFF • The first ice and water dispensed may include particles or odor from the water supply line or the water tank. • When the water supply will be shut off for several hours. • When the ice bin is removed for more than one or two minutes. • When the refrigerator will not be used for several days. NOTE: The ice bin should be emptied when the icemaker on/off button is turned to the OFF mode.
USING YOUR REFRIGERATOR FOOD STORAGE GUIDE Wrap or store food in the refrigerator in airtight and moisture-proof material unless otherwise noted. This prevents food odor and taste transfer throughout the refrigerator. For dated products, check date code to ensure freshness. Items STORING FROZEN FOOD NOTE: Check a freezer guide or a reliable cookbook for further information about preparing food for freezing or food storage times. Freezing Your freezer will not quick-freeze a large quantity of food.
USING YOUR REFRIGERATOR REFRIGERATOR SECTION WATER DISPENSER To dispense cold water, push on the dispenser switch with a glass. ARNING: Do not put your fingers up the ice chute W opening. Doing so can result in severe injury. NOTE: The dispenser is equipped with a light that turns on when the dispenser pad is engaged. AUTION: Do not dispense ice into fine china or C crystal glasses. China or crystal can break. Dispenser Switch Push Some dripping may occur after dispensing.
USING YOUR REFRIGERATOR USING YOUR REFRIGERATOR USING YOUR REFRIGERATOR USING YOUR REFRIGERATOR REFRIGERATOR SHELVES To a the front of up and REFRIGERATOR SHELVES To reinstall a shelf—Tilt the front of shelf the shelf up and REFRIGERATOR SHELVES To reinstall reinstall a shelf—Tilt shelf—Tilt the front ofatthe the shelf upheight. and REFRIGERATOR SHELVES To reinstall a shelf—Tilt the front of the shelf upheight.
USING YOUR REFRIGERATOR HUMIDITY CONTROLLED CRISPER The crispers provide fresher tasting fruit and vegetables by letting you easily control humidity inside the drawer. TEMPERATURE CONTROLLED PANTRY DRAWER The Temperature Controlled Pantry Drawer provides storage space with a variable temperature control that can keep the compartment at a slightly different temperature than the refrigerator section. This drawer can be used for large party trays, deli items and beverages.
USING YOUR REFRIGERATOR PREVIEW GRAB-N-GO (On some models) The PreView Grab-N-Go compartment allows for easy access to commonly used food items. GRAB-N-GO CASE (On some models) To open the Grab-N-Go case, slightly push the marked area to pop it open. The Grab-N-Go Case is removable for easy cleaning and adjustment. 1. To remove the Grab-N-Go case, lift up and pull out. 2.
USING YOUR REFRIGERATOR REPLACING THE AIR FILTER FREEZER SECTION It is recommended that you replace the air filter: • Approximately every six months. • When the CHANGE AIR FILTER light turns on. EXTRA ICE BIN 1. Pull the Freezer Drawer and the top Pullout Drawer out as far as possible to remove the Extra Ice Bin. 2. Gently lift and pull out the ice bin. 3. To replace, pull both drawers out as far as possible, and set the bin in its correct position in the Pullout Drawer.
USING YOUR REFRIGERATOR USING YOUR REFRIGERATOR USING YOUR REFRIGERATOR PULLOUT DRAWERS 2. To replace, slightly tilt up the front of the drawer, insert the drawer into the frame, and push it back into PULLOUT DRAWER 2. To Install, slightly tilt up the front and insert the drawer place. Top Drawer PULLOUT DRAWER 2.
WATER FILTER USING YOUR REFRIGERATOR 2. Replace with a new water filter. WATER FILTER REFRIGERATOR SHELVES To reinstall a shelf—Tilt the front of the shelf up and guide the shelf hooks into the slots at a desired height. • Take the new The shelves in your refrigerator are adjustable to meet It is recommended that you your replace the water filter: lower the front of the shelf so that the hooks individual storage needs. Your model may have glass water Then, filter out drop into the slots. wire shelves.
WATER FILTER Performance Data Sheet Use Replacement Cartridge: MDJ64844602(9980) The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system as specified in NSF/ANSI Standard 42 and Standard 53 and Standard 401. SSystem tested and certified by NSF International against NSF/ANSI Standard 42, Standard 53 and Standard 401. For the reduction of substances listed below.
WATER FILTER WARNING Application Guidelines/Water Supply Parameters Service Flow 0.5 gpm (1.9 lpm) Water Supply Potable Water Water Pressure 20-120 psi (138 - 827 kPa) Water Temperature 33°F - 100°F (0.6°C - 38°C) To reduce the risk associated with ingestion of contaminants: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.
CARE AND CLEANING INSIDE WALLS (allow freezer to warm up so the cloth will not stick) To help remove odors, you can wash the inside of the refrigerator with a mixture of baking soda and warm water. Mix 2 tablespoons of baking soda to 1 quart of water (26 g soda to 1 liter water.) Be sure the baking soda is completely dissolved so it does not scratch the surfaces of the refrigerator. WARNING Explosion Hazard CAUTION: While cleaning the inside, do not spray water. Use non-flammable cleaner.
CARE AND CLEANING LIGHT BULB REPLACEMENT WHEN YOU MOVE When you are moving your refrigerator to a new home, follow these steps to prepare it for the move. WARNING 1. Remove all food from the refrigerator and pack all frozen food in dry ice. 2. Unplug the refrigerator. 3. Clean, wipe and dry thoroughly. 4. Take out all removable parts, wrap them well and tape them together so they do not shift and rattle during the move. Refer to the Using your Refrigerator section for removable instructions. 5.
CONNECTING THE WATER LINE WHAT YOU WILL NEED • Copper Tubing, ¼ in. outer diameter, to connect the refrigerator to the water supply. Be sure both ends of the tubing are cut square. • To determine how much tubing you need: measure the distance from the water valve on the back of the refrigerator to the water supply pipe. Then, add 8 feet (2.4 m). Be sure there is sufficient extra tubing (about 8 feet [2.4 m] coiled into 3 turns of about 10 in.
CONNECTING THE WATER LINE INSTALLATION INSTRUCTIONS 5. TIGHTEN THE PIPE CLAMP Tighten the clamp screws until the sealing washer begins to swell. NOTE: Do not overtighten clamp or you may crush the tubing. Washer Install the shutoff valve on the nearest frequently used drinking water line. 1. SHUT OFF THE MAIN WATER SUPPLY Turn on the nearest faucet to relieve the pressure on the line. Pipe Clamp 2. CHOOSE THE VALVE LOCATION Choose a location for the valve that is easily accessible.
CONNECTING THE WATER LINE 8. FLUSH OUT THE TUBING Turn the main water supply on and flush out the tubing until the water is clear. Shut the water off at the water valve after about one quart of water has been flushed through the tubing. 10. TURN THE WATER ON AT THE SHUTOFF VALVE Tighten any connections that leak. 9. CONNECT THE TUBING TO THE REFRIGERATOR WARNING CAUTION: Check to see if leaks occur at the water line connections.
TROUBLESHOOTING GUIDE Before conducting troubleshooting, make sure that the following basic requirements are met: Service Flow Water Supply Water Pressure Operating Ambient Temperature Limits 0.5 gpm (1.9 lpm) Potable Water 20-120 psi (138 - 827 kPa) Electrical Ratings 115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes. 55°F - 110°F COOLING Problem Refrigerator and Freezer section are not cooling. Possible Causes The refrigerator control is set to OFF (some models).
TROUBLESHOOTING GUIDE COOLING Problem Possible Causes Refrigerator or Refrigerator was recently installed. Freezer section is too warm. Air vents are blocked. Doors are opened often or for long periods of time. Unit is installed in a hot location. A large amount of food or hot food was added to either compartment. Interior moisture buildup. Solutions It may take up to 24 hours for each compartment to reach the desired temperature. Rearrange items to allow air to flow throughout the compartment.
TROUBLESHOOTING GUIDE COOLING/ICE & WATER Problem Food is freezing in the refrigerator compartment. Possible Causes Food with high water content was placed near an air vent. Refrigerator temperature control is set incorrectly. Refrigerator is installed in a cold location. Frost or ice crystals Door is opened frequently or for long form on frozen food periods of time. (outside of package). Door is not closing properly. Refrigerator or Incorrect temperature control settings. Freezer section is too cold.
TROUBLESHOOTING GUIDE ICE & WATER Problem Icemaker is not making enough ice (continued). Possible Causes Doors are opened often or for long periods of time. Doors are not closed completely. The temperature setting for the freezer is too warm. Dispensing water slowly. Water filter has been exhausted. Reverse osmosis filtration system is used. Low house water supply pressure. Not dispensing ice. Doors are not closed completely. Infrequent use of the dispenser.
TROUBLESHOOTING GUIDE ICE & WATER Problem Icemaker is not making ice. Possible Causes Refrigerator was recently installed or icemaker recently connected. Solutions It may take up to 24 hours for each compartment to reach the desired temperature and for the icemaker to begin making ice. Icemaker not turned on. Locate the icemaker on/off button and confirm that it is turned ON. The refrigerator is not connected to a water supply or the supply shutoff valve is not turned on.
TROUBLESHOOTING GUIDE ICE & WATER Problem Ice has bad taste or odor. Possible Causes Water supply contains minerals such as sulfur. Icemaker was recently installed. Ice has been stored for too long. The food has not been stored properly in either compartment. The interior of the refrigerator needs to be cleaned. The ice storage bin needs to be cleaned. Dispensing warm water. Refrigerator was recently installed. The water dispenser has been used recently and the storage tank was exhausted.
TROUBLESHOOTING GUIDE NOISE Problem Clicking Rattling Whooshing Gurgling Popping Sizzling Vibrating Dripping Pulsating or HighPitched Sound Possible Causes The defrost control will click when the automatic defrost cycle begins and ends. The thermostat control (or refrigerator control on some models) will also click when cycling on and off. Rattling noises may come from the flow of refrigerant, the water line on the back of the unit, or items stored on top of or around the refrigerator.
TROUBLESHOOTING GUIDE PARTS & FEATURES Problem Doors will not close correctly or pop open. Possible Causes Food packages are blocking the door open. Ice bin, crisper cover, pans, shelves, door bins, or baskets are out of position. The doors were removed during product installation and not properly replaced. Refrigerator is not leveled properly. Solutions Rearrange food containers to clear the door and door shelves.
DIAGNOSTICS Diagnostics (On some models) 3. Hold the mouthpiece of your phone in front of the speaker that is located on the right hinge of the refrigerator door, when instructed to do so by the call center. Should you experience any problems with your refrigerator, it has the capability of transmitting data via your telephone to the Diagnostics Team. This gives you the capability of speaking directly to our trained specialists.
Kenmore ® Customer Care Hotline To schedule in-home repair service or order replacement parts Para pedir servicio de reparación a domicilio, y ordenar piezas 1-844-553-6667 www.kenmore.