Installation guide

GAS COOKTOP INSTALLATION INSTRUCTIONS
& Install Burner Caps
A.
B.
O
Unpack the burner grates.
Burners: Unpack the Burner heads and burner caps.
Place the burner heads and caps on the matching
bases.
The caps should be level after installation
Be sure that all the burner caps burner head are
correctly placed BEFORE using your cooktop
21) Install Filter and Grates
DO NOT operate the vent without the filter in place.
Vent Chamber
e
Place the filter diagonally through
the vent chamber.
Make sure it rests, at an angle, on
the supports in the vent opening.
Grease Filter
Vent Chamber
Figure 25
VENT FILTER LOCATION — 30" MODEL
Vent
Chamb _ Grease Filter
amber
Figure 26
VENT FILTER LOCATION — 36” MODEL
Carefully place vent grate seal over the vent chamber
on the cooktop, with the side marked FRONT to the
front. Make sure the collar on the bottom of the seal
is fully inserted the vent opening.
Place the vent grate over the vent opening. Place the
burner grates over the burners.
aN Vent Grate
Vent Grate Seal
Figure 2
VENT GRATE AND SEAL LOCATION — 30" MODEL
Figure 28
VENT GRATE AND SEAL LOCATION — 36" MODEL