Installation guide

Overhead Cabinet Should Not Exceed a
Maximum Depth of 13" (33 cm)
Bottom of an Unprotected
Wood or Metal Cabinet _A
24" (61 cm) Min, when
Bottom of Wood or Metal
Cabinet is Protected by Not
LessThan 1/8" Flame
Retardant Millboard Covered
With Not LessThan No_ 28
MGS Sheet Steel, 0_015"
(0_4 ram) Stainless Steel,
0,024" (0_6 ram) Aluminum
or 0020" (05 ram) Copper,
"_ Nearest Combustible
Surface Above
Countertop
18" G
(457 cm)
10"
cm)
J Min. From Edge of
Cooktop to Nearest
Combustible Wall
(Either Side of Unit)
* Letters on this figure refer to chart
on front page except for J and I(.
2 I/2" (64 cm) Min_
From Edge of Cutout to
Front Edge of
Countertop
Approximate Location
of Junction Box
It is not recommended to use
drawer underneath cooktop.
Empty space is needed for
installation purpose
_To eliminate the risk of burns or
fire by reaching over heated surfaces, cabinet
storage space located above the cooktop
should be avoided. If cabinet storage is
provided, risk can be reduced by installing a
range hood that projects horizontally a
minimum of 5" (12.7 cm) beyond the bottom
of the cabinets.
MODEL__ J
30 7Y2" (I9.I cm)
Figure 2 - COUNTERTOP CUTOUT OPENING