I_ L I T E ® INDUCTION COOKTOP CUBIERTA DE INDUCCION Models, Modelos 790.4290* * = Color number, nQmero de color r www.sears.com Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. 318200639 Rev.
Table of Contents Cooktop Warranty ........................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ...................... 3 - 4 Product Record ............................................................... 4 Serial Plate Location ..................................................... 4 Induction Cooktop Features ...................................... 4- 5 Induction Cooktop Display Messages ............................ 6 Before Using the Cooktop ...................................
Important Safety Instructions Read all instructions This manual contains important before using this appliance. safety symbols & instructions. Save these instructions Please pay attention to these symbols for future & follow reference. all instructions given.
Important Safety Instructions • Use Proper Pan Size. This appliance is equipped with one or more COOKING ZONES of different sizes. Select utensils having flat bottoms large enough to cover the minimum Cooking Zones. The pan detection sensors will not allowthe affected Cooking Zone to operatewithout a pan of sufficient size present. • Utensil Handles Should Be Turned Inward and Should • • • • Not Extend Over Adjacent Cooking Zones.
Induction Cooktop Features READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE INDUCTION COOKTOP Fig 1. Fig2. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Left Rear Cooking Zone. Left Front Cooking Zone. Right Rear Cooking Zone. Right Front Cooking Zone. Center Cooking Zone. Left Front Cooking Zone Control Pads. Left Rear Cooking Zone Control Pads. Center Cooking Zone Control Pads. Right Rear Cooking Zone Control Pads. Right Front Cooking Zone Control Pads. Main Cooktop Controls (See Fig 2). Fig3. 12. 13.
Induction Cooktop Display Messages LED Messages Fig. 4 Fig. 6 or Light Indicators Fig. 5 Fig. 7 Displayed by Main Control CONTROLS LOCK - This feature allows the cooktop to be locked only when the cooktop is switched to OFE Touch and hold the LOCK key pad for 5 seconds. A beep will sound and the Lock indicator light will glow (Fig. 5). Once locked, no other displays will glow and no Cooking Zones will activate. To turn the Controls Lock OFF, touch and hold the LOCK key pad for 5 seconds.
Before Using the Cooktop USE THE CORRECT COOKWARE TYPE - The magnetic Cooking Zone sensors located below the cooktop surface require the use of cookware made with magnetic material in order to start the heating process on any of the Cooking Zones. When purchasing pans, look for cookware specifically identified by the manufacturer for use with Induction cooktops. If you are not sure, use a magnet to test whether the cookware type will work.
Before Using the Cooktop Use Quality Condition Cookware Induction in Good The cookware used with the Induction Cookware Recommendations INCORRECT CORRECT • Cookware not centered on Cooking Zone surface. • Cookware centered correctly on Cooking Zone surface. Cooktop should have flat bottoms that make good contact with the entire surface of the Cooking Zone. Check for flatness by rotating a ruler across the bottom of the cookware (See Fig. 21 ).
Before Using the Cooktop Prior to using your cooktop for the first time, apply the recommended cooktop cleaning creme (on the web visit www.sears.com for replacement cleaner, item number40079) to the ceramic surface. Buffwith a non-abrasive cloth or noscratch cleaning pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning cream leaves a protective finish on the glass to help prevent scratches and abrasions.
Setting Cooktop Controls To Turn ON one or more of the Cooking Zones (cont'd) IMPORTANT OPERATING NOTES: • Fluids spilled or objects lying on the controls area of the cooktop may cause the cooktop to display an error code and turn OFF while cooking. Clean the spills or remove the objects from the cooktop. • Be sure the cooktop vent holes are NOT blocked. If the vent holes are blocked the cooktop internal sensor may shut OFF the cooktop to avoid overheating the appliance.
Setting Cooktop Controls Minute Timer The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep track of time from 1 to 99 minutes. The LED display located to the left of the Timer UP/DOWN arrow key pads will begin to count down minutes once set. To Set the Minute Timer: 1. Touch the @ listed under the word "TIMER".
Setting Cooktop Controls Power Sharing The cooktop is equipped with five cooking zones within three heating sections: right, left and center. Each section is powered by one induction inverter. The two cooking zones in the right and left section share the power of one inverter. The center section has its own inverter. If you are cooking in both zones of a heating section, the last zone that began to heat will cook at the power setting you selected.
General Care & Cleaning Ceramic Glass Cooktop Consistent Cleaning and proper & Maintenance cleaning is essential to maintaining your Ceramic glass cooktop Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme to the ceramic surface (on the web visit www.sears.com for replacement cooktop cleaner, item number 40079). Buff with a non-abrasive cloth or no-scratch cleaning pad. This will make cleaning easier when soiled from cooking.
General Care & Cleaning Do not use the following on the ceramic cooktop (Soo Fig. 26): • Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean. • Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop. • Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint on the cooktop which can burn and cause discoloration.
Before You Call • Solutions to Common Problems Before you call for service, review this list. tt may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE POSSIBLE CAUSE/SOLUTION Entire cooktop does not operate Cooktop controls are locked. Set the cooktop controls to unlock the Cooktop (See p. 11 for further instructions).
Before You Call • Solutions to Common Problems (cont'd) OCCURRENCE POSSIBLE CAUSE/SOLUTION Cooktop Zone Control displays E and LED Main Control displays a 2 digits error code. Induction Cooktop main control has detected a fault or error condition. Try turning electrical power supply OFF and back ON to cooktop in order to reset Cooktop main controls. If fault recurs, record fault number and turn power supply to Cooktop OFF. Call 1-800-4-MY-HOME,for assistance (See back cover).
PROTECTION AGREEMENTS ACUERDOS DE PROTECCION In the U.S.A. En los EE.UU. Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ®product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Protection Agreement can save you moneyand aggravation. Acuerdos maestros de protecci6n Lo felicitamos por haber hecho una compra inteligente.
Your Home For repair-in your home-of lawn and garden equipment, all major brand appliances, or heating and cooling systems, nomatterwhomadeit, nomatterwhosoldit! For the replacement parts, accessories and owner'smanualsthatyouneedtodo-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.
