Installation guide

Overhead Cabinet Should Not Exceed a
Maximum Depth of 13" (33 cm)
Bottom of an
Unprotected Wood
or Metal Cabinet
24" (61 cm) Min when
Bottom of Wood or
Metal Cabinet is
Protected by Not Less
Than 1/8" Flame
Retardant Millboard
Covered VVith Not Less
Than No_ 28 MGS Sheet
Steel, 0015" (0_4 ram)
Stainless Steel, 0024"
(0.6 ram) Aluminum or
0_020" (0,5 ram)
Copper
2 I/2" (6.4 cm)
Mira From Edge
Cutout to Front
Edge of
Countertop
\
18"
(457 cm)
Cutout and Nearest I0"
CornbustibleSurface 254cm)
Above Countertop
Approximate Location
of Junction Box
25" Min
63_5 cm Min_)
H Min_ From Edge of
Cooktop to Nearest
Combustible Wall
(Either Side of Unit),
Drawers cannot be used with
this cooktop since burner
box extends G below
surface of countertop,
For dimensions A, D, E& F, seeTable on page 1,
_To eliminate the risk of burns or fire by
reaching over heated surfaces, cabinet storage space located
above the cooktop should be avoided, If cabinet storage is
provided, risk can be reduced by installing a range hood that
projects horizontally a minimum of 5" (12_7cm) beyond the
bottom of the cabinets,
Figure 2 - COUNTERTOP CUTOUT OPENING