Installation guide

KENMORE ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
(and Optional Electric or Gas Cooktop Combination)
CAI] Do not remove spacers (if equipped) on the side walls and/or on the back of the
built-in oven. These spacers center the oven in the space provided. The oven must be centered to
prevent excess heat buildup that may result in heat damage or fire.
we i
1" (2.5 em) —
7
c
ae
H Hole for
B
48
5/8”
Cable
SC (123.5 em)
Ww
|
3”
(7.6
cm)
_
~
IN
—
(29.2
em)
Mex.
Door Open S NN
SS pacer
(see note 2) | DT Electrical
-
NA
2"
(5
em)
Wide
Wood
Junction
Box
NN, Spacer if Needed
Figure 2
27" AND 30" DOUBLE OVENS (Single Ovens see Figure 1)
NOTES:
1. Base must be capable of supporting 300 pounds
(136 kg) for 27" models and 375 pounds (170 kg)
for 30" models.
. Allow at least 21" (53.3 cm) clearance in front of
even for door depth when it is open.
. Dimension G (cutout depth) is critical to the
proper installation of the built-in oven. If the
4. For a cutout height greater than 4914" (125.1 em)
add a 2” (5 cm) wide wood shim of appropriate
height to each side of the opening under the
appliance side rails.
For Cutout height between 518/16" (131.6 em) and
51% /is" (131.9 em), you can order a larger inferior
trim kit by calling the Service Center.
oven decorative trim does not butt against the Black
ac
903114-9010
903114-9100
White
903114-9011
903114-9101
Stainless Steel
903114-901S
903114-910S
cabinet, or if noise is heard on convection models, -
Trim 27
Trim 30"
verify dimension G to assure it is according to the
required dimension.
PRODUCT DIMENSIONS
Moo ee
27" (68.6cm) 27 (68.6) 501 (128.3) 24° /s (62.5) 24V/> (62.2)
30" (76.2cm) 30 (76.2) 501 (128.3) 281/; (71.8) 24V/ (62.2)
CUTOUT DIMENSIONS AND CABINET WIDTH
F H
MODEL G (min.) i
Min. Max. Min. Max.
27" (68.6em) | 247/8(63.2) | 251% (64.1) 23 (59.7) 487 /3 (124.1) | 497/8 (126.7) | 271/s (68.9) Min.
30" (76.2cm) | 28% (72.4) | 29 (73.7) 23 (59.7) 487 /s (124.1) | 497/s (126.7) | 30°/8(76.5) Min.
All dimensions are in inches (cm).