Table of Contents Wall Oven Warranty 4 Consumer Defined Control... 10-1 IMPORTANT SAFETY INSTRUCTIONS -3-4 Setting Oven Controls vos. 12-26 Product Record Self-Cleaning airs 27-29 Serial Plate Location sever “ Adjusting the Oven Temperature aur 29 Wall Oven Features cur 8 goo Core 8 Cleaning 30-32 Oven Vent and Racks ss <8 Before You 35-38 Air Circulation in the Oven nnn pre gn Agreements.
Important Safety Instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions, Please pay attention to these symbols and follow all instructions given. PRINCELINESS uric symbol will halo alert yeu to situations that may cause serious badly harm, death or Property damage. PIRFIEITITE 11. oo symbol will hale alert vou to situations That may cave bodily injury or property damage.
Important Safety Instructions IMPORTANT—Do not attempt to operate the appliance during a power failure. If power fails, always turn off the appliance. If the appliance is not turned off and the power resumes, it will begin to operate again, Once the power resumes, reset the clock and oven function, IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN + Use Care When Opening an Oven Understand to the side of the appliance when opening the door of a hot oven.
Wall Oven Features Note: The features of your wall oven will vary according to model. Your Electric Wall Oven Features At a Glance 1. Electronic Oven Controls with Clock and Kitchen Timer Decorative Accent Light Upper Oven Door Lock Upper Oven Vent Upper Oven Broil Element Self-Cleaning Convection Oven NO RW Single or Double (seem models) Convection fan Adjustable Oven Racks 9. Large Ce Piece Door Handle ® 10. Glass Front Oven Door with Large Window Opening 1.
Oven Vent and Racks Upper Oven Ve cat . : . ent Footie Free Some models are equipped with o blower which runs in baking and self-cleaning mode to keep all internal components at a cool temperature. The blower may keep running even if the oven has been fumed off, until the components have cooled down. On 307 double wall ovens, the blower in both ovens will start when using one of the ovens in self-clean mode, Oven Vent Location Each oven is vented at its upper front frame.
Control Pad Features READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your vane, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide, NOTICE : The illustrations and instructions contained In this document only refer to the upper vane operations.
Setting the Clock Setting the Clock The (2) pad is used fo set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash. The display will stp flashing. INSTRUCTIONS PRESS DISPLAY To set the clock {example below for 1:30) 1. Press, "CLO" will appear in the display (Fig. 1). 2.
Setting the Clock Setting Continuous Bake or 12 Hour Energy Saving The 590% and din pads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the vane if the oven control is left an for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking. INSTRUCTIONS PRESS DISPLAY To set the control for Continuous Bake or 12 Hour Energy Saving features or _ 1.
Consumer Defined Control Note: The Consumer Defined Control features are adjustments to the control that will nat affect cooking results. These include the Oven Blackout, Temperature Display and Silent Control Operation features. Setting Oven Lockout Feature a The «2% pud controls the Oven Lockout future. The Oven Lockout feature automatically locks the oven door and prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
Consumer Defined Control Setting Temperature Display — Fahrenheit or Celsius (et) The to display temperatures In Fahrenheit or Celsius, The oven has been preset at the factory to display in Fahrenheit. Note: both ovens will be changed at the same time. Flex and dean pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed INSTRUCTIONS PRESS DISPLAY Te change display from Fahrenheit to Celsius or Celsius to va Fahrenheit pun 1 Press LU and hold for 7 seconds.
Setting Oven Controls Setting Preheat The tees pad controls the Preheat feature, The Preheat feature will bring the oven up fo temperature and then indicate when ta place the food in the oven. Uss this feature when recipes call for preheating. Presenting is nof necessary when roasting ar cooking casseroles. The oven can be programmed to preheat at any temperature between 170°F to 550°F (77°C to 288°C). INSTRUCTIONS PRESS DISPLAY To set the Preheat temperature for 350°F Arrange the inferior oven wrecks.
Setting Oven Controls Important Things to Know Before Setting any Basic Oven Cooking Function This appliance has been factory per-set to start any BAKE, CON BAKE, CON ROAST, PREHEAT, CAKES or BREADS function with the oven set temperature automatically set for 350°F However if desired, the oven sof temperature may be adjusted at any time during the cooking process. You may also choose to add a COOK TIME or DELAY START with any of the functions listed above.
Setting Oven Controls Oven Baking For best cooking results, heat the oven before booking cookies, breads, cakes, oles or pastries, ste. There is no need to preheat the oven for roasting meat or baking casseroles. The caking times and temperatures needed to bake a product may vary slightly from your previously owned appliance. Baking Problems and Solutions Chart Baking Problems Causes Corrections Cookies and biscuits burn on the bottom.
Setting Oven Controls Setting Cook Time The So pad controls the Cook Time feature. This feature can be set with any any Bake, Conn Bake, Conn Roast, Preheat, Slow Cook, Cakes or Breads functions. The automatic timer of the Cook Time feature will turn the oven off after cocking for the desired amount of Hume you selected.
Setting Oven Controls Melting Delay Start Deo The Sar pad controls the Delay Start feature. This feature van be set with any any Bose, Conn Bake, Conn Roast, Preheat, Slow Oak, Cakes or Breads functions. The automatic timer of the Delay Start feature will turn the oven on at the time you select in advance. This feature can be combined with Cook Time ta turn the oven off after the dime selected.
Setting Oven Controls Setting Broil The (22) pact controls the Broil feature. When broiling, heat radiates downward from the oven briefer for even coverage. The Broil temperature may be set between 400°F and 550°F The broil pan and broil pan insert used together allow dripping grease to drain and be kept away farm the high heat of the oven broiler, DO NOT use the broil pan without the insert (Soe Fig. 5). DO NOT cover fhe broil pan insert with foil.
Setting Oven Controls Benefits of Convection Bake: —multiple rack baking. — Some Foods cook faster, saving time and energy. —No special pans or bake ware needed. Meting the Food Categories Features The pads have been designed to give optimum cook performance for the foods Clarke and fees pads may be used when cooking certain food items. These selected in sate category. = The LE) pad combines a cook cycle with the convection fan and element to roast meats and poultry.
Setting Oven Controls Using and Selling Meat Probe Checking the infernal temperature of your food is the most effective way of insuring that your food has been properly cooked. When cooking meat such as roasts, hams or poultry you con use the meat probe to check the intern temperature without any guesswork.
Setting Oven Controls Using and Setting Meat Probe To use the meat probe: 1 wipe Noe Prepare the food and properly insert the temperature probe info the food. DG NOT PREHEAT or start cooking before properly inserting the meat probe. The probe should be inserted info the food und receptacle while the oven is still cool. Place the prepared food an the desired oven rack position and shied info the over. Plug the meat probe into the probe receptacle located on the left front oven cavity side.
Setting Oven Controls Setting Convection Bake T= The CONVECTION BAKE pad controls the Convection Bake feature. Use the Convection Bake feature when cooking speed is desired. The vane can be programmed for Convection baking at any temperature between 170° F (77° C) to 550° F (268° CJ. Convection baking uses a fan to circulate the oven’s heat evenly and continuously within the oven (See Figure 1. This improved heat distribution allows for fast, even cooking and browning results.
Setting Oven Controls Setting Convection Convert feature The CON CONVERT comer pad is used to automatically convert a standard Baking recipe for convection baking. When set properly, this feature is designed fo display the vane set converted (reduced) temperature in the display. Convection Convert MUST be used with the Convection Bake keypad. Cook Time or Delay Start function may be added.
Setting Oven Controls Setting the Slow Cook Feature The Desk pad is used to activate this future. The Slow Cook feature may be used fo cook foods mare slowly, at lower oven temperatures and provides sacking results much the same way as o Slow Cooker or Crack-Pot. The Slow Cook feature is ideal for rousting beef, perk & poultry. Slow Cooking meats may result in the exterior of meats becoming dark but not bum This is normal. There are 2 settings available, high {Hi} or low (Lo).
Setting Oven Controls Setting the Warm & Hold ™ Feature jot The & Hold pad turns ON the Warm & Hold feature and will maintain an oven temperature of 170°F The Warm & Hold feature will keep oven baked goads warm for serving up to 3 hours after cooking his finished. After 3 hairs the Warm & Hold feature will shut the oven OFF. The Warm & Hold feature may be used without any other cooking operations or can be used after cooking has finished using BAKE, CONVECTION BAKE.
Setting Oven Controls Te Set the Sabbath Feature [for use on the Jewish Sabbath & Holidays) The Sims and Se pads are used to set the Sabbath feature. The Sabbath feature may only be used with the pad. The oven temperature ray be set higher or lower after setting the Sabbath feature [the oven temperature adjustment feature should be used only during Jewish Holidays), however the display will not visibly Shaw or provide any audible tones indicating whether the change secured correctly.
Setting Oven Controls Te Set the Recipe Recall Feature This future will GLY recall a Bake, Convection Bake, Cakes, Breads, Convection roast, Slow Cook, Cook Time or Cook Time with a Warm & Hold added setting. This feature will nat work with any other function including o Delay Start, o Clean Cycle or a Broil setting. INSTRUCTIONS PRESS DISPLAY Te Program the Oven to Begin Baking Intermediately and record Recipe (example: for a Bake mode at 425°C) oe er 1. Place the food in the oven, y 2. Press San.
Self-Cleaning During the self-cleaning cycle, the outside of the wall oven con become very hot fo the touch, DO NOT leave a small children unattended near the appliance. 4h CAUTION FRI. is extremely sensitive fo the fumes given off during the self-clean cycle of any wall oven. Move birds to another well ventilated room. PIER 00 NOT fins the oven walls, racks, bantam or any other part of the appliance with aluminum foil.
Self-Cleaning To Start the Self-Clean Cycle The FLEX CLEAN &bi: pad controls the Self-Cleaning feature, If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.
Self Cleaning Stopping or Interrupting a Self-Cleaning Cybele If it becomes necessary to stop or interrupt @ self-cleaning cycle due to excessive smoke or fire in the oven: 1. Press N27. 2. The oven door can only be opened after the oven has cooled down for approximately 1 HOUR and the «DOOR LOCKED" icon is na longer displayed. Note: If your clock is set for normal 12 hour display mode the Delayed Self-Clan cycle can never be set to start more than 12 hours in advance.
General Care & Cleaning Cleaning Various Parts of Your Oven Be fare cleaning any part of the oven, be sure all controls are muted OFF and the oven is COOL. REMOVE SPILLOVERS AND HEAVY SMILING AS SUM AS POSSIBLE, REGULAR CLEANING NOW WILL REDUCE THE EXTENT AND DIFFICULTY OF MAJOR CLEANING LATER, Surfaces How to Clean Aluminum {Trim Pieces) & Vinyl Use hot, soapy water and a cloth. Dry with a clean cloth. Do not scour or use surpassed cleaners, ammonia, powdered cleaners or commercial oven cleans.
General Care & Cleaning Door Hinge locations with oven door fully open i, Wo Roller pin Hinge arm hook hs Fig. 4 Care and Cleaning of Stainless Steel (Some models) Sortie models are equipped with stainless steel exterior parts. Special care and dealing are required for maintaining the appearance of stainless parts. Please refer to the table provided at the beginning of the General Care & Cleaning section in this Use & Care Guide. Removing and Replacing the Lift-Off Oven Door & canon The road is heavy.
General Care & Cleaning Changing the Oven Light Changing the Halogen Oven Light (some models) The oven lights will automatically turn ON when the oven door is opened. The oven lights emery also be manually operated by pressing the ® pad. Lift up and pull out. Halogen oo Light Bulb The oven light bulb is covered with © glass shield. The glass shield can be removed to be cleaned manually or to change oven light, THIS GLASS SHIELD MUST BE IN PLACE WHENEVER THE OVEN IS IN USE.
Before You Call Solutions to Common Problems Before you coll for service review this list. It may save you time and expense. The list includes common occurrences that are net the result of defective workmanship or materials in this appliance. OCCURRENCE POSSIBLE CAUSE/SOLUTION Oven Control Beeps and Displays uny F Electronic control has detected a fault condition. Press STOP/CLEAR to clear code error (example FIT). the display and stop the beeping. Reprogram the oven.
Before You Call Solutions to Common Problems OCCURRENCE POSSIBLE CAUSE/SOLUTION Given smokes excessively during broiling. Oven door is closed. Door should be open during broiling, Meat too close to the broiler unit. Reposition the rack fo provide more clearance between the meat and the broiler. Preheat broil element for quick searing operation, Meat not properly prepared, Remove excess fut from meat, Slash remaining fatty edges to prevent curling, but do not cut into the lean.
Get it fixed, at your home or ours! Your Home For troubleshooting, product manuals and expert advice: @ manageability www.managemylife.com For repair — in your home — of all major brand appliances, lawn and garden equipment, or heating and cooling systems, L no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.