Installation guide

O Removeallpackaginginsidetheovensand
removethelowerovenracksandtheirsupports
(seeowner'sguideforfurtherinstructions).
O Findthe2 includedin the
mounting
screws
literaturepackage.
_1 Inserttheunitintothecabinetopening.Slideunit
inwardleaving1½"(3.8cm)clearancebetweenthe
unitandfrontof cabinet(seeFigure7).
i:_ 1½" (3.8 cm)
clearance
between unit
Figure 7
_Pull the armored cable the hole for it in thethrough
cabinet and toward the junction box while moving
the appliance inward.
_lnstall the bottom trim using the screws supplied
with the unit (Figure 8).
Bottom trim supplied must be installed for the oven
to function properly. DO NOT operate the oven
without the supplied bottom trim installed as shown.
Screws
supplied
Figure 8
_ Install now center using screws
the trim the
supplied with the unit, on both sides (Figure 9).
@ o
Figure 9