Manual

E ! T E
CAREANDCLEANING
RemovableParts
iiii ii,ljlll[ -q
_ AUTION: You
must disconnect
electrical power
to the oven at the main
circuit breaker or fuse box before
attempting to replace oven light
bulbs, Do not touch the light
bulbs with bare hands, The bulbs
get very hot very quickly. Wrap
foam rubber from bulb package
around bulb when installing.
When removing the bulb, wait
until the bulb has cooled and
use a dry cloth,
To give you the best lighting available,
your oven has two halogen bulbs
Both lights are on the ceiling of the
oven cavity
Receptacle Socket
Bulb with
Wrapping f eolb
Glass
Cover
TO REMOVE
1. You must disconnect electrical
power to the oven at the main
circuit breaker or fuse box
2. Turn the glass cover
counterclockwise 1/4turn until the
tabs of the glass cover clear the
grooves of the socket
3. Pull straight out to remove the bulb
TO REPLACE
1. Wrap bulb with cotton cloth or
bulb packaging material. Don't
touch bulb with your fingers
2. Push bulb straight into receptacle
all the way, Use only a 120-volt,
35-watt Halogen bulb
3. Place the tabs of the glass cover
into the grooves of the socket
4. Turn the glass cover clockwise
V4turn.
5. Reconnect electrical power to the
oven at the main circuit breaker or
fuse box
CLEANING MATERIALS
• Dishwashing detergent
. Warm water
° Scouring pad or soap-filled
steel-wool pad
u -
,°
Raised Back t_._._" _
oftheRack__
TO REMOVE
1. Pull the racks out to the stop
position
2. Pull up the front of the rack and
slide under the bump of the rack
guide
TO CLEAN
Clean with warm water and detergent
For hard-to-remove stains, gently
scrub with a scouring pad or a
soap-filled steel-wool pad Rinse well
TO REPLACE
1. Place the raised back of the rack
onto the rack guides
29
continued on next page