Owners manual

22
Oven Controls
Changing between continuous bake setting or 12-hour
energy saving feature
The oven control has a factory-preset 12-hour energy saving
feature that will turn the oven off automatically if the oven is
left on for more than 12 hours. The control may be programmed
to override this feature to continuously bake.
To change to continuous bake mode:
1. Press and hold Timer ON/OFF until the control beeps once
(about 6 seconds). “StAy On” or “12 Hr Off” will appear in
display.
2. Press and to toggle between continuous bake
and 12hr energy saving. “12 Hr Off”will appear in display
for energy saving mode, “StAy On” for continuous bake
mode.
3. To save the selected mode, press START. The display will
return to idle.
Setting Timer
The timer may be set from 1 minute to 11 hours and 59 minutes.
To set the timer:
1. Press Timer ON/OFF.
2. Use the numeric keys to set the time or press and hold
or until the desired time is shown.
3. Press START. The timer will begin to count down.
4. When the set time has run out, the timer will sound with
three beeps and will continue to beep three times every 60
seconds until Timer ON/OFF is pressed.
To cancel the timer before at any time, press Timer ON/Off
once.
Important notes:
• The timer does not start or stop the cooking process. It
serves as an extra timer in the kitchen that will beep when
the set time has run out. The timer may be used alone or
when any other oven function is active.
• The timer will display hours and minutes until 1 hour
remains. When less than 1 hour remains, the display will
count down in minutes and seconds. Once the timer has less
than 1 minute remaining, only seconds will display.
• If the timer is active when oven cooking, the minute timer
will show in the display by default. To view information of
any other active oven function, press the key once for the
active function to view status.
Setting Bake
Use the bake function whenever the recipe calls for baking
using normal temperatures. A reminder tone will sound when the
set bake temperature is reached. Bake may be programmed
for any temperature from 170°F to 550°F (77°C to 288°C).
The factory preset bake temperature is 350°F (177°C).
Always use pot holders or oven mitts when using
the oven. When cooking the oven interior, oven racks and cook-
top will become very hot which can cause burns.
To set Bake
1. Arrange oven racks and close oven door.
2. Press Bake. 350° appears in display.
3. Within 15 seconds, use the numeric keys to set the termper-
ature or press or to adjust the temperature in
5°F increments (1°C).
4. Press START when the desired temperature appears. The
oven will begin heating to the selected temperature. When
the oven temperature reaches the set temperature, and the
oven control will beep three times.
To cancel bake at anytime, Press .
To change the oven temperature after Bake has started:
1. Press Bake. The current set oven temperature will display.
2. Press or to increase or decrease the current set
temperature to the new oven temperature.
3. Press START.
Important notes:
• The oven will bake no longer than 12 hours. If you wish to
bake for a longer period, see “Changing between
continuous bake setting or 12-hour energy saving feature”
on page 22 mode for detailed information.
STOP
STOP