BE ne hd Err ere dole? oR ALT, Dd SE TTT dtd node ill li Kenmore Vacuum Cleaner OWNER’S MANUAL READ THIS MANUAL for important safety, assembly and operating instructions.
——CONTENTS WARRANTY 1 “VACUUM CARE SERVICE oo Bag Changing... ; IMPORTANT SAFETY INSTRUCTIONS . 2 Motor Safety Filter Cleaning... PARTS AND FEATURES 3 Bert Changing, Brush Changing Eh ASSEMBLY 45 and Brush Cleaning ins. © ATTACHMENT ASSEMBLY 5. Cleaning Exterior and Attachments... : Light Bulb Changing © USE Clog Removal To Vacuum :. 050 GL 6 How fo Select Proper | Hesitant for Cleaning...
——IMPORTANT SAFETY INSTRUCTIONS IN warning To reduce the risk of fire, electrical shock, injury fo persons or damage when using your vacuum cleaner, follow basic safety precautions including the following: Co ) Read his manual before assembling or using your vacuum cleaner. . Use your cleaner only as described in this manual. Use only with Sears recommended attachments. To reduce the risk of electrical shock Do not use outdoors or on wet surfaces.
——PARTS AND FEATURES "UPRIGHT VACUUM CLEANER if Is important fo know your Vacuum cleaner parts ~and features fo assure iis proper ond safe use: : Review Hess before using your cleaner.’ +, | COPY YOUR MODEL AND SERIAL NUMBERS HERE. | Copy this information from the bottom of the Hindi : vacuum; cleaner info these spaces. Keep these J . numbers for future reference. If you need device or ed call with a question, have this information ready: Cd ose.
——ASSEMBLY HANDLE ASSEMBLY Before assembling your vacuum cleaner, be sure you have ail the parts shown on page 3. WARNING ee ius complete. Failure 10 do so could result in’ electrical shock or injury. oe : Back OF Vacuum Cleaner Remove the handle screw located just below the top edge of the back of the vacuum, Gee illustration above). . Position fhe handle so the cord Rooks are towed the back of the cleaner, = Insert the handle pm into the opening at the top of the : vacuum.
Using & screwdriver, tighten the screw. } CORD ASSEMBLY Make sure the quick release upper cord hook the upright position. Remove the wire tle from the power cord. Wrap the power cord around the upper. and lower cord hooks. CAUTION DONOR vert Overweening coupe screw holes, DO NOT operate te cleaner without the screw in place. =—ATTACHMENT ASSEMBLY 10 ASSEMBLE ATTACHMENTS Affair the handle has been assembled to the body and the power cord hos.
——0 VACUUM { Warning — + DO NOT use outlets above counters. Damage fo ,Hems in surrounding area could occur, "ose core in plugging in the vacuum, The vacuum shod be in the OFF position. Lo Epithelium cord hook down. © 2. Puff the cord off the hook. : #.
——USING ATTACHMENTS TO USE ATTACHMENTS ; VIN CAUTION When using attachments, be careful not to over “extend fhe hose length when reaching, Trying to teach beyond the hose teach could cause the ‘cleaner tip over NOT place hands or feet inclement the unit when inserting ihe hose. The brush assembly begins 10 revolve rapidly when the vacuum is farmed on and ON SOME MODELS: Is switched fo a coy pet height sel feint seeing.
=—VACUUM STORAGE Gather the cord. ond wisp it loosely % around the upper | ‘and wore: wording | hooks, . Store the Cleaner ‘incendiary, indoor area, on the floor with the handle: “locked in the Upright position, =—VACUUM CARE ALWAYS FOLLOW ALL SAFETY ! PRECAUTIONS WHEN CLEANING AND. SERVICING THE VACUUM CLEANER. WARNING acts! Short ani Peon in bind rapping the cord oo fight pews sires on the cord can cause cord damage. A dogged cord an electrical shock hazard and could cause per anal injury or goddamn.
=—BAG CHANGING WARNING! | -Unplug power cord. from electrical outlet. TO REMOVE BAG: = \ | Squeeze the dust ~” cover release and JF 2) pull forward on the Lbs wo | fopofihedust A Eke | me i motor safety fitter. CAUTION NEVER REUSE A DUST BAG. Very fine materials, such. as carpet fresheners, lace powder, fine dust, plaster, S001, ei.
——EIGHT BULB CHANGING NOT ON ALL MODELS 1 ‘WARNING Hectic shock Or Personal fry Hg ; Disconnect electrical supply before servicing or ; cleaning the unit. Fol lure to do so could re stilt in Electrical shock or perseverance injury firm cleaner I _ Disconnect electrical supply. The handle must be pulled down and the clone. fumed over. Release the lower:plate by pushing the tabs toward the center. Tabs Grasp the clips at the back and pull forward and up to remove the lower plate.
——CLOG REMOVAL WARNING Electrical Shock Or Personal Injury Hazard Disconnect electrical supply before servicing or chinning the unit. Failure to do so could result in electrical shock or personal injury from cleaner For best cleaning Unplug the power. cord from the outlet before checking the airflow. passage, © ‘Check @ach starred area occasionally for clogs. © Disconnect the wand from the nozzle hose and check the wand for clogging. : While running the vacuum cleaner with the wand dis.
——TROUBLESHOOTING Review his: char fo find do-it-yourself solutions for minor performance problems, : FN WARNING supply before servicing of cleaning the unt Fair o do so cooed result in electrical shock or. personal injury from cleaner suddenly starting. : Cleaner won't sun; PROBLEM § POSSIBLE CAUSE “Unpunished wer outlet, 2. Tipped cut PA fuse af household service panel, 3. On/Off switch not fumed ON. _ POSSIBLE SOLUTION “1.” Plug in firmly, sh Off switch Reset circuit breaker of replace fuse.
Aspirateur Ken more MANUEL D’INSTRUCTIONS LIRE CE MANUEL contenant des instructions importantes de sécurité, de montage et d'utilisation.
A bide dun tournevis. serrer la visse, So 7 } MONTAGE! DU CORDON Assurerquele support supérieur de relâche rapide du f cordon est placé vers le haut, Ret Patache. du. cordon &lec figue, Enrouler le. cor don lec: 4 Toque auteur du support supérieur. ef inférieur du Cor ATTENTION | Ne pas semer de maniéré excessive. Serrer.de Ihe exopssivepourendomitogeies tous Jae ia visse.