Manual

Review this table to find do-it-yourself solutions for minor performance problems. Any ser-
vice needed, other than those described in this owner's manual, should be performed by
an authorized Sears service representative,
WARNING Electrical Shock Hazard
....|............ Disconnect electrical supply before servicing or cleaning the unit,
Failure to do so could result in electrical shock or personal injury.
1. Unpluggedat wallou!let,
2. Trippedcircuilbreakedblownfuse
at householdservicepanel.
3. Loosehose electricalconnections,
..........= ..................
1. Fullor cloggeddust bag,,
2. CloggedaMlowpassages
Cleanerwon't start.
Poor Jobof d_rt
pick-up.
Cleaner starts but
cuts off.
PoweroMete®will net
run whenattached°
3. Dirtytillers
4. Wrong pile height setting,
5. Open suctioncontrol
6. Holein hose.
7. Worn Power-Mate_ agitator,
8. Wornorbrokenbelt.
9, Dirtyagttatoror end caps.
10. Canisterhood open,
1. Hoseor hoodelectricalconnedions
24 Trippedoverloadprotectorin
Power-Mate=.
3, Trippedoverloadprotector
incanister.
I. Plugin firmly,push ON/OFFswilch to ON,
2. Resetcircuitbreaker or replacefuse_
3,
2_
8_
4o
5.
6.
7.
I]&9o
t0.
2o
34
Reconnecthose ends,(page 7),
Changebag, (page 14)
Clear aidlowpassages,(page14),
Changefilters,(page 15-!6)-
Adjust setting. (page9).
Adjust control,(page 12},,
Replacehose°
Changeagitator_(page tg),
See BELTCHANGINGAND AGITATOR
CLEANfNG,(pages17-10).
Closeandlalch hood.
Checkconnections,reconnecthoseends, (page 7)
Removeanyitems thatmaybe caught
orlammed,Ihen reset. 1!cleaneralerts
and stops again,cleanagitatorand endcaps.
thenreset,(pages 12. 17-18}.,
Turn oil and unplugthe vacuumlromoutletand
waitapproximately50 minutes andplug the vacu-
um in, turnback on to see i{the protectorhas
reset, (page13),Changedualbag, clearaidlow
blockage,(page 14)_
1, Plug_nfirmly. (page 6).
t,, Power_Mets®connections
unplugged,
2. Wornor broken belt,
3o Dirt,/agitator or endceps_
4. Trippedoverloadprolectorin
PoweroMata_
2 & 3. See BELTCHANGINGAND AGITATOR
CLEANING,(pages 17-18)
4. Checkagllalorarea tot excessivelint
build-upor jamming.Cleanagiletorand
end caps,thenreset,(pages 12.17.18}
5. Moveswitchto CARPETposition,(page8).
i. Checkfor ctogs in air passages, (page 14)
2o Ctaan lenses,(page 10),
....i,,' Check"'lorclogs Inei_passages,(page i4}:
5. Switchnot In CARPETposition.
Constantgreenlight on Io Dirtpassageisclogged
in dirt sensor, 2. Lensesare dirty,
AnYlsome,or ell rod'lights lo"'Dirt Passageiaclogged
in dirt sensor burn and never
turngreen,
No greenor red dirt I. Switchnot inCARPETpos_lion, 1. Moveswitchto CARPETposition,(page8).
sensor lights. 2. Nopowerto sensor board. 2. Taketo your nearestSears Serv}ceCenter.
......................................... ............ ,u_
EleetronlcfMechanlcal 1. Fullor clogged dustbag 1o Changebag, (page14),
Bag/Hose Check indicator 2. Dirty fillers 24 Changefillers. (paget5-16),,
activates. 3. Blockedaidiow passage 3, Cfearblockagefrom aidlowpassage,(page 14),
4. Certainattachment !eels, 4_ Thisisnormal.Lighlshouldgo off
when tool isremoved,
cleaner picksup moveable I_ Wrongpileheightsetting 1. Adiustsetling. (page g)
rugs-or- Power.Mate® 2, Suctiontoo slrong 2. Opensucltoncontrol,(page 12)
pushestoe hard,
Lightwon'twork, i. Burnedout light bulb. 1. Changelight bulb, (page 18).
Cordwon't rewind. 1. Dirty powercord. 1. CIeanthe powercord.
2. Cordjammed, 2. Pull out cordand rewind
Cleanerleavesmarks on carpel 1. Wrongvacuumingpattern, 1_ SeeVACUUMiN=G'TiPS_ipage._},.
2O