Manual

Materials and Basic Tools Needed
Materials Needed
To simplify the installation Sears has available the installation
parts shown below. You may or may not need all of these materi-
als, depending on your type of installation.
E_t_ l
Water Heater
Inslallstlon
II __ IiI _ 28" DIAMETER DRAIN PAN FOR
I_ WATER HEATERS 26" IN
DIAMETER AND UNDER
EXPANSION TANKS FOR THERMAL f/ \
EXPANSION CONDITIONS AVAIL-
WATER HEATER INSTALLA-
TION KIT WITH FLEXIBLE
CONNECTORS FOR 3/4" OR
I/2 °' THREADED OR COPPER
PLUMBING
ABLE IN 2 GALLON AND S GALLON
CAPACITY THROUGH LOCAL
SEARS SERVICE CENTERS
20" DIAMETER DRAIN PAN
FOR WATER HEATERS I E" IN
DIAMETER AND UNDER
Basic Tools
You may or may not need all of these tools, depending on y_our
type of installation. These tools can be purchased at your local
Sears store.
• Pipe Wrench (2) 14"
• Screwdriver
• 6 Foot Tape or Folding Rule
• Garden Hose
• Drill
• Pipe Dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
SLOT-HEAD SCREWDRIVER
PHILLIPS SCREWDRIVER
PIPE DOPE (SQUEEZE TUBE)
PIPE
WRENCH
roll of teflon tape
(Use only on water connections)
DRILL
ADDITIONAL TOOLS NEEDED WHEN
SWEAT SOLDERING
• Tubing Cutters or Hacksaw
• Propane Torch
• Soft Solder
• Solder Flux
• Emery Cloth
• Wire Brushes
HACKSAW
3/4" WIRE BRUSH
112"WIRE BRUSH
PROPANE TORCH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY SOLDER TUBING
CLOTH FLUX CUTTER