Installation Instruction Instrucciones de Instalacion English /Español Kenmore Elite Microwave Oven Built-in Trim Kit Marco Del Horno Incrustado De Microondas Models / Modelos : 405.22273310-Stainless Steel/Acero Inoxidable 405.22303310-Stainless Steel/Acero Inoxidable 405.22309310-Black/Negro Customer Assistance / Asistencia al Cliente 1-800-842-1289 Sears Brands Management Corporation Hoffman Estates, IL 60179 U.S.A. www.kenmore.com www.sears.com www.kmart.
Table of Contents / Tabla de contenidos MICROWAVE OVEN SAFETY...................................................1 INSTALLATION INSTRUCTIONS.............................................2 Tools and Part........................................................................2 Location Requirements .........................................................2 Required Cutout Dimensions.................................................2 Trim Kit Frame Dimensions....................................................
INSTALLATION INSTRUCTIONS Tools and Parts Required Cutout Dimensions Tools Needed Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. ■ ■ ■ Measuring tape Pencil Phillips screwdriver ■ ■ 22 ³⁄₄" (57.8 cm) 1 ¹⁄₁₆" (2.7 cm) Drill 7/64" drill bit htdiW 17" (43.2 cm) min. 17 ¹⁄₈" (43.5 cm) max. Parts Supplied (not shown to scale) A 25 ¹⁄₂" (64.8 cm) 1 ¹⁄₁₆" (2.7 cm) 3" (7.6 cm) B A. Trim kit frame overhang B.
Electrical Requirements WARNING Prepare Microwave Oven 1. Unplug microwave oven before proceeding with installation. 2. Remove any loose items inside microwave oven. 3. Gently turn microwave oven onto its top, with the door facing forward (toward installer). 4. Align the #33 holes on the microwave oven bottom with the #33 holes on the rails, as shown, making sure the flanges are forward and pointing up. A Electrical Shock Hazard B C Plug into a grounded 3 prong outlet. Do not remove ground prong.
3. Align the center arrows on the bottom duct with the centerline drawn in Step 1 above. Install the Microwave Oven 1. Gently return microwave oven to its upright position. 2. Position microwave oven near cutout opening. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. A B Do not use an adapter. Do not use an extension cord. A. Bottom duct B.
5. Slide the microwave oven back and into place. The mounting holes of the rail flanges and bottom duct flange will align against the bottom front facing of the cutout/cabinet opening. 6. Secure the microwave oven to the cutout/cabinet by installing four short screws into the mounting holes. 2. Holding the trim kit frame in place, use 7/64" drill to drill four pilot holes into the front facing of the cutout/cabinet through the mounting hole guides in the upper and lower corners of the trim kit frame.
SEGURIDAD DEL HORNO MICROONDAS Su seguridad y la de otras personas es muy importante. Existen muchos mensajes de seguridad importante tanto en este manual como en el dispositivo. Siempre lea y sigas todas las instrucciones de seguridad. Este es el símbolo de alerta de seguridad. Este símbolo lo alerta sobre peligros potenciales que pueden matarlo o lastimarlo tanto a usted como a otras personas. Todos los mensajes de seguridad serán precedidos por este simple y las palabras "PELIGRO" o "ADVERTENCIA”.
INSTRUCCIONES DE INSTALACIÓN Herramientas y piezas Dimensiones de recorte requeridas Herramientas necesarias 22 ³⁄₄" (57.8 cm) Reúna todas las herramientas y piezas requeridas antes de comenzar con la instalación. Lea y siga las instrucciones proporcionadas para las herramientas listadas a continuación. ■ Cinta de medir ■ Lápiz ■ Destornillador Phillips 1 ¹⁄₁₆" (2.7 cm) htdiW 17" (43.2 cm) min. 17 ¹⁄₈" (43.5 cm) max. ■ Taladro ■ Broca de taladro de 7/64" A 25 ¹⁄₂" (64.8 cm) 1 ¹⁄₁₆" (2.
Requerimientos eléctricos Preparación del horno microondas 1. PELIGRO 2. Riesgo de descarga eléctrica Conecte a un enchufe a tierra de tres puntas. No retire el enchufe a tierra. No utilice un adaptador. No utilice una extensión o alargador. El no seguir estas instrucciones puede provocar la muerte, incendio, o descargas eléctricas. Desconecte el horno microondas antes de proceder con la instalación. Retire todos los elementos sueltos que se encuentren al interior del horno. 3.
3. Alinee la flecha central de la base inferior con la Instalación del horno microondas línea que dibujó en el Paso 1. 1. Gire suavemente el horno microondas a su posición derecha. 2. Posicione el horno microondas cerca del espacio de la abertura. PELIGRO Riesgo de descarga eléctrica A Conecte a un enchufe a tierra de tres puntas. No retire el enchufe a tierra. No utilice un adaptador. No utilice una extensión o alargador.
5. Deslice el horno microondas hacia atrás para OBSERVACIONES: ponerlo en su lugar. Los agujeros de los soportes de los rieles y de la base inferior se alinearán contra la parte delantera inferior de la abertura del gabinete. 6. Asegure el horno microondas a la abertura/gabinete instalando cuatro tornillos cortos en los agujeros de montaje. Los agujeros deben ser taladrados en forma descendente desde la parte superior y en forma ascendente desde la parte inferior en un ángulo de cerca de 45°.
KENMORE ONE YEAR LIMITED WARRANTY If this product fails due to a defect in material or workmanship within one year from the date of purchase, return it with proof of purchase to any Sears store or other Kenmore outlet in the United States for free replacement. This warranty is void if this product is ever used for other than private household purposes. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.