Manual

1. The Kenmore Elite Series hood must be installed with
interior blower models 51200 or 51600, or exterior blower
57745 only. Other blowers cannot be substituted.
(Blowers sold separately.)
Plan where and how the ductwork will be located.
Install proper-sized ductwork, transition(s), elbow(s), and
roof or wall cap for the model of blower you are using.
For best results, use a minimum number of transition
and elbows.
ROOF CAP
7" (I78 ram)
ROUND DUCT
HH0_24A
I
DECORATIVE
FLUE (305
or SOFFIT _
HOOD
t
24" TO 30" (609 to 782 mm)
ABOVE COOKING SURFACE
WALL CAP
ROUND
ELBOW
MODEL 51600 SINGLE BLOWER I
I
TYPICAL DUCTWORK
ROOF CAP
\
10" (254 ram)
ROUND DUCT
DECORATIVE
FLUE (305
or SOFFIT
HOOD
t
24" TO 30" (606 to 762 i'qrn)
ABOVE COOKING SURFACE
WALL CAP
4-1/2" x 18-1/2"
to 10"
(114 x470to
ROUND
MODEL 51200 DUAL BLOWER |
]
TYPICAL DUCTWORK
EXTERIOR BLOWER
10"(254mm)
ROUNDDUCT
DECORATIVE
FLUE 10" (254 ram)
or SOFFIT (305
EXTERIOR
) BLOWER
HOOD 58140
ROUGH-IN KIT
t
24" TO 30" (609 to 762 mm)
ABOVE COOKING SURFACE
MODEL 57745 EXTERIOR BLOWER /
J
TYPICAL DUCTWORK
Dimensions for the most common installations are shown
below.
Adjust your measurements for various heights of ceilings,
soffits, cabinets or cooktops. For proper operation, the
hood must be a minimum of 24" and a maximum of 30"
above the cooktop.
Standard
8 ft. (2.44 m)
ceiling
19"
(483 mm)
H°°d X
24"
(610 ram)
Top of wood
mounting strip
571 Series
Backsplash
(optional)
Minimum distance
between the hood and
the cooktop
_l_
-- Standard 36"
(914 mm)
Cooktop H cooktop HHOO28A
INSTALLATION WITH STANDARD 18" HIGH
OVER-COOKTOP CABINET
Standard
Standard 8 ft. (2,44 m)
12"(305ram) ceiling
soffit
13"
(33mm)O Top ofwood
X mounting strip
Hood
-- l 571 Series
I _ Backsplash
optional)
30"
(762 mm) Maximum distance
between the hood and
the cooktop
_ -- Standard 36"
Cooktop (914 mm) H
cooktop HHOO27A
INSTALLATION WITH 12" SOFFIT OR
OPTIONAL SOFFIT CHIMNEY 551 SERIES
m
m
O_
m
m
O
=
m
m
C3
(b