Manual

I. Hanghoodfrom(4)Mounting Screws. Slide hood

towards walt until mounting screws are engaged in

narrow end of (4) _. Tighten mounting screws

securely. A long screwdriver works best.

2. Replace bottom cover.

3. Connect ductwork to hood. Use Duct TaPe to make

joints secure and air tight.

4. Install (2) PAR20, 50 W Maximum Halogen Bulbs or

(2) R16, 40 W Maximum Incandescent Bulbs.

Purchase bulbs separately.

I See page 4 for Bulb information. I

Bulbs available by calling Sears at 1-800-4-MY-HOME _

,_ CAUTION: Bulbs may be hot! Refer to bulb

packaging for further information.

5. Replace filters, turn on power at service panel, and test

for proper operation.

KEYHOLE (4)

• : ii _

MOUNTING SCREW (4)

DUCT

TAPE

PAR20,

50W MAX.

HALOGEN

BULB (2)

- or-

R16,

40W MAX.

INCANDESCENT

BULB (2)

::3

¢3