Owner's Manual

TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, the agitator must be cleaned every:
time the belt is chan ecj__d_d.
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Cleaner Use CicadA itator
HEAVY - every week
(used daily)
MODERATE - every month
(used 2-3 times/week)
LIGHT - every 2 months
(used 1 time/week)
iMPORTANT
Turnoff and unplug vacuum cleaner from
electrical outlet. Check and remove hair,
stringand lint build-up frequently in the
PowerMate agitator and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris lo-
cated on the agitator or end caps.
AGITATOR ASSEMBLY
-End Cap Belt Path
BrashUnit n _.ap
LIGHT BULB CHANGING
WARNING
Electrical Shock Or Personal injury
Hazard
Turn off and unplug vacuum cleaner
before performing maintenance to the
vacuum cleaner. Failure to do so could
result in electrical shock or personal
injury from the vacuum cleaner
suddenly starting.
i ,cAuT,o.
_Do not plug in or turn on until the vacuum
cleaner is completely reassembled.
1. Remove PowerMate ® cover as shown in BELT
CHANGING AND AGITATOR CLEANING
section.
_Pull out t; I
left side _)
2. Remove the light
bulb by pulling
straight out.
CAUTION
_arfs.
Push in
to right
3. To replace the
light bulb, carefully
insert fully into slot.
4. Reinstall PowerMate ® cover as shown in
BELTCHANGING AND AGITATOR CLEANING
section.
NOTE: See PARTSAND FEATURESfor Bulb
number.
-18-