Owner's Manual

CANISTER
1. Open the canister hood.
2. Check to see that the dust bag is properly
installed. See BAG CHANGING for instruc-
tions.
3. Check to see that the motor safety filter is
properly installed. See MOTOR SAFETY FIL-
TER CLEANING for instructions.
HOOD AND TOOL STORAGE
COVER
It is normal for the canister hood and tool
storage cover to come off when opened fur-
ther than needed. Line up the hinge slots, in-
sert the hinges into the slots, and close the
hood and tool storage cover to reinstall.
_CAUTION
Never open canister hood with the tool
storage cover open. This will help to
prevent damage from occurring to the
canister hood and/or fool storage cover.
HOSE
1. Line up the
hose latch tab
and notch in
canister hood
and insert hose
into canister until
it snaps in place.
Hose
Latch
Tab
Notch
To remove: Depress hose latch tab upward
and pull up on hose.
Handle J-_
/
Lock _ i o
Button
Handle
Quick
Release
2. Insert handle
into wand until
lock button
snaps in place.
Be sure hose is
not twisted.
To remove: Press
handle quick re-
lease button
and pull up on
handle.
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage. Store hose in a loosely coiled
position so the hose covering is not stressed.
=8=