Use and Care Guide

Edge Cleaning Mode
Tap “Edge Cleaning” on the App to
start cleaning in Edge Cleaning Mode.
This intelligent robot automatically reduces
its moving speed once it detects a wall and
then cleans along the wall to ensure the
edge is cleaned thoroughly. The robot will
return to the charging dock once finished.
Manual Cleaning
You can direct the robot to clean a
particular area by using the directional
buttons within the App. Select ,
and then use the directional arrows to
adjust the cleaning path of the robot as
necessary.
Return Home
Select “Return Home” on the App to
return the robot to the charging dock. The
robot will automatically return to the dock
when battery power level is low.
Schedule A Cleaning Session
You can schedule the robot to start
cleaning at a specified time.
NOTE:
The robot will automatically
turn on once you connect the robot to the
charging dock.
1. Select the “Schedule”
within the
App and then tap on the top right
corner of the app interface to add
schedule.
2. Set your desired hour and minute. Press
"Save".
3. Select the “Repeat” field to set the
weekdays to cycle the cleaning if
necessary.
- 16 -
OPERATING INSTRUCTIONS
Move forward
Move backward
Turn right
Turn left