Use & Care Guide Manual English de Uso y Cuidado / Espa_ol Models/Modelos: 790.3230% I
Table of Contents Cooktop Warranty ...................................................................... 2 IMPORTANT SAFETY iNSTRUCTiONS ............................... 3-4 Product Grounding Liquefied Before Setting Surface Setting Various Enamel Cooktop ................................................................... 5 Cleaning the Grates ............................................................. 13 ................................................................
important Safety instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
important burner flame to direct contact of clothing. Proper relationship improve efficiency. Safety and may result in ignition of utensil to flame will also Do not use stove top grills on your sealed gas burners. If you use a stove top grill on a sealed gas burner, it will cause incomplete combustion and can result in exposure to carbon monoxide levels above allowable current standards. This can be hazardous to your health.
Product Record Serial Plate Location in this space below, record the date of purchase, model and serial number of your product. You will find the model and serial number printed on the serial plate. This serial plate is located under the cooktop. See bottom of this page for the serial plate location. Please see the illustration for exact location. Remember to record Model No. the serial number for future_reference. 790. Serial No.
Before Setting Surface Controls Control Locations of the Gas Surface Burners Your cooktop is equipped with gas surface ratings. The ability to heat food quicker the burner size increases. ° The small SIMMER burners with different and in larger volumes burner is best used for simmering etc. This burner is located BTU increases as delicate at the right rear burner position sauces, on the cooktop. Figure 1 - Model 790.
Before Setting Surface Controls Assembly Burner Cap of the simmer, regular, power and turbo boil surface burner caps and burner grates It is very important and Surface locations. to make sure that all of the Surface Burner Grates are installed correctly 1. Remove aii packing material from cooktop 2. Discard all packing material (if applicable). 3. Position the burner caps in the correct 4. Unpack Burner Grates and position Note: Burner heads are fixed.
Surface Cooking CORRECT iNCORRECT Use Proper Cookware Cookware should have flat make good contact * Curved and warped pan bottoms. bottoms that with the entire surface heating element. Check for flatness * by rotating a ruler across the bottom of the cookware * Tight fitting * Weight (See Figure 1). Be sure to follow the recommendations for using cookware Flat bottom pan. Figure 1 as * and straight Pan overhangs unit by more than 2.5 sides. cm (1"). lids.
Seffing Surface Burner Controls Do not place plastic items Setting Proper Surface such as salt and pepper shakers, spoon For most cooking, holders one to complete or plasflc wrappings on top of Burner Flame start on the highest control the range when if is in use. These items could melt or ignite. Potholders, of utensil used and the amount towels or Manual Lighflng In the event of an electrical the surface power outage, burners can be lit manually.
Seffing Surface Burner Controls Seffing the Simmer / Regular / Power / Turbo Boil Burners Operating 1. 2. the Regular OFF position 3. Burner: Place cooking utensil on surface burner. Push the surface control knob down and turn counferciockwlse (See Figure 1). Release the knob and rotate to the LImE position. Note: All four (or five) electronic surface ignitors time. However, only the burner you are turning o MED check that the burner Vlsua[ly 5.
Setting Surface Burner Controls Setting the Dual Ring Burner The Dual Ring Burner has two rings of flame that you can control for two different heat levels, one for small and one for large cookware. Large Caokware 1. 2. Operation (Figure 1; Zone A & B) Place a large cooking utensil centered over the dual surface Burner Grate. Push the surface control knob down and turn counterclockwise out of the OFF position. 3. Release the knob and rotate to the LITE position (Figures 2 & 3).
General Care & Cleaning Cleaning Various Parts of Your Cooktop Before cleaning any part of the cooktop, be sure a[[ controls are turned OFF and the cooktop is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEAN[NGS NOW WILL REDUCE THE DIFFICULTY AND EXTENT OF A MAJOR CLEANING Surfaces How Painted Control Knobs For general LATER. to Clean grease, cleaning, apply use hot soapy water a liquid Rinse with a damp detergent and a cloth.
General Care & Cleaning Cleaning the grates The burner grates are dishwasher safe and may be cleaned in the dishwasher. Remove any excessive soils before placing in the dishwasher. IMPORTANT • For proper orifice gas flow and ignition of the burners • The ¢ooktop is not removable. _To avoid ¢ooktop or burner burners avoid • Follow ever an absorbent cap.
Before You Call Solutions to Common Problems Before you call for servicenreview this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE POSSIBLE CAUSE/SOLUTION Surface Surface burners do not llghf Control knob has not been completely the Surface Control desired flame size. knob to LITE until turned burner to LITE.
PROTECTION Master Protection Agreements Congratulations Acuerdos on making a smart purchase. Kenmore®product is designed Your new and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Protection Agreement can save you money and aggravation. The Master Protection your new product.
Your Home For troubleshooting, product manuals and expert advice www.managemylife.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.