Owners manual

CLEANING

1. Be sure to unplug fan from the electrical supply source before cleaning.

2. Plastic parts should be cleaned with mild soap and damp cloth or sponge.

Thoroughly remove soap film with clean water.

3. Be sure not to allow water or other liquid to enter the inside of the motor.

NOTICE:

1. After replacing fuse, do not at first operate at full speed. Doing so may cause

product malfunction or damage.

2. If the fan doesn't seem to operate properly after fuse replacement, check to

make sure that the fuse was inserted correctly.

FUSE REPLACEMENT

1. Grasp the plug and remove it from the receptacle

or other outlet device. Do not unplug by pulling on

the cord.

2. Open the fuse cover. Slide open the fuse access

cover on top of attachment plug towards blades.

3. Remove the fuse carefully. Push the fuse from the other side or turn the fuse

holder over to remove the fuse.

WARNING: Risk of fire. Replace the fuse only with 2.5 A, 125 Volt fuse.

4. Close the fuse cover. Slide closed the fuse access cover on top of the

attachment plug.

WARNING: Risk of fire. Do not replace attachment plug. It contains a safety

device (fuse) that should not be removed. Discard product if the attachment

plug is damaged.

PRINTED IN CHINA