Owners manual

3
High
Med
Low
Of
f
OPERATION INSTRUCTIONS
Speed Control Buttons
To turn fan on, one of the speed buttons, Low, Med or High, must first
be depressed. Then press the Off button. While fan is running the
speed can be adjusted by pressing a different speed button. Press
Off button to stop fan.
Oscillation Control Button
Push down the oscillation control button on the top of the motor unit to
start fan oscillation from side to side. Raise oscillation control button
back up to stop oscillation motion.
Vertical Air Direction
To adjust angle of vertical air direction, grasp the fan body neck with
one hand and the guard assembly with the other and tilt the fan head forward
or back. There are five click-in angle positions.
Fig.2 Fig.3 Fig.4
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed,or call Customer Assistance at
866-646-4332.
1. Before cleaning fan, always unplug it from the electrical outlet.
2. To ensure adequate air circulation to the motor, use a vacuum to keep vents
at the rear of the motor housing free from dust, fluff, etc. Do not disassemble
fan to remove dust or fluff.
CAUTION: To avoid injury from electrical shock, unplug the fan before using a
vacuum cleaner to clean the vents.
3. Wipe the exterior parts with a soft cloth soaking a mild detergent.
Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use gasoline or paint thinner as a cleaner.
4. Do not allow water or any other liquid into the motor housing or interior parts.
MAINTENANCE INSTRUCTIONS