Manual

Operating Instructions Model 14795
Selector Buttons Dool Latch (Locked) Cycle Indicator' Dial
Starting Your Dishwasher
1. Load the dishwasher (see pages 6 and 7)°
2. Add detergent (see page 9)_
3. Close the door but do not latch it.
4, If dishwasher' drains into a food waste disposer,
operate disposer until it is empty
5. Turn on hot water faucet nearest dishwasher and
let it run until the water is hot,
6. Push selector button for desired cycle. If you plan
to use the LIGHT WASH cycle, push the NORMAL
WASH button_
7. Push selector buttons for desired options_
When NOT using DELAY START.°.
Slowly turn the Cycle Indicator Dial to START for
the NORMAL WASH cycle Then latch fire door
to start the dishwasher,
When using DELAY STARlr (for all cycles) .....
Slowly turn the Cycle Indicator Dial to desired delay
time (up to 6 hours), Their latch the door to start
the timer.
The DELAY light will come on and stay on until
the dishwasher starts automatically at the end of
the selected delay time.
Select the Cycle
0,,_., POTS & PANS Cycle
..... For heavily soiled dishes and pots
•_ Cycle _ime" Approx 92 minutes*
WaterUsage: Approx 116 gallons
-Q-
;;_&'
NORMAL WASH Cycle
For normally soiled dishes
Cycle rime: Approx. 83 minutes*
WaterUsage: Approx,_ 11 6gallons
LIGHt WASH Cycle
For prerinsed or lightly soiled dishes
and dishes that have been stored
Cycle Time: Approx 75 mlnutes*
Water Usage: Approx. 83 gallons
WATER MISER Cycle
For tableware that is lightly soiled
with fresh soils and is prerinsed
Cycle Time: Approx, 83 minutes*
Water Usage: Approx 98 gallons
*Unextended times These cycle times may be increased up to 9 minutes if necessary for your dishwasher to heat the water to proper
temperature for good washability when you use the WATER HEAT button