Manual

PROBLEM CAUSED BY
Dishes not dry .Water is not hot
Spotting and
filming
•HOT DRY OFF
option selected
•Improper loading
• Rinse agent
dispenser empty
• Hard water
•Water is not hot
• HOT DRY OFF
option selected
• Not enoughor
poor quality
detergent
•Old detergent
•No rinse agent
SOLUTION
• Raise water heater thermostat to 140°F it
necessary.
• Do not select HOT DRY OFF option. Allow
dishes to dry in heated air.
• Load dishes so items drain properly. Avoid
overloading.
• Fill rinse agent dispenser if empty.
• Filldetergentcupsto capacity.Usedishwasher
detergentwithhighestavailablephosphorous
content.Maybenecessaryto installa water
softener.
• Raise water heater thermostat to 140°F.
•Dryingwithoutheatmaycause some
spotting. DonotselectHOT DRY OFF option.
'Use morefresh automaticdishwasher
detergent.Use detergentwith highest
availablephosphorouscontent,
especiallyifyou havehardwater.
•Use onlyfresh, automaticdishwasher
detergent.Storetightlyclosedina cool,dry
place.Discardold,lumpyor separated
detergent.Do notfill detergentdispenser
untilreadytowash.
•Fill rinse agent dispenser.
To remove stubborn spots and film frol
glassware:
1. Removeall metalutensilsfrom the
dishwasher.
2. Do not add detergent.
3. Select POTS PANS cycle.
4. Start the dishwasher and allow to run for
18 to 20 minutes.The dishwasher will now
be in the main wash.
5.Thenopenthedoorand pour2 cups
(500 ml) whitevinegarinto bottomof
dishwasher.
6.Closethedoorand allowtocompletethe
cycle.
If vinegar rinse doesn't work: Repeatas
above,exceptuse1/4cup(60 ml)of citric
acidcrystalsinsteadof vinegar.(Most
drugstorescarrycitricacidcrystals.)
16