Manual

To Drop or Raise the Feed Dogs

The drop feed dogs lever is located underneath the free

arm bed on the back side of the machine.

_1:To drop the feed dogs, push the lever in the direction

of the arrow, as illustrated.

_2_To raise the feed dogs, push the lever in the direction

of the arrow, as illustrated, and turn the handwheel

toward you. Feed dogs must be up for normal sewing.

Darning

_1_,Stitch selector: 4 to 6

_2)Stitch width: 6.5

@ Stitch length: Any

_4_,Needle thread tension: 2 to 6

@ Pressure adjusting lever: 0

'_6_Presser foot A: Zigzag foot

_,_7_.Presser foot F: Satin stitch foot

_8_Feed dogs: Dropped

Drop the feed dogs. Center the hole in the fabric on an

embroidery hoop, as shown.

Lower the presser foot F and sew at a slow speed.

Move the fabric back and forth slowly until the darning area

is covered. Turn the fabric 1/4 turn (90°), and sew another

layer of stitching over the first layer. After darning is

completed, return the pressure adjusting lever to 3 for

normal sewing.

NOTE:

If the fabric is thin or badly damaged, use a separate

piece of fabric under the hole to reinforce it.

I I