Manual

Manual Buttonhole (Option)
,_1_Stitch selector: _] (BH)
/2_ Stitch width: 3 to 6.5
_3_Stitch length: 0.25 to 1.0
@ Needle thread tension: 2 to 6
,_5_Presser foot B: Buttonhole foot
• Tosew
If the diameter of the button is more than 1.0" (2.5 cm), a
buttonhole must be made manually as follows:
[] Turn the handwheel toward you to raise the needle to
its highest position. Raise the presser foot.
[] Set the stitch at" D" by turning the stitch selector.
[] Attach the buttonhole foot [ B] .
[] Pull the buttonhole lever downward as far as it will go.
[]Lower the needle into the garment where the buttonhole
is to start, and lower the foot.
f
\J
l
,_4/,
¢ }_ _ WIDTH
0--1 --2--3=4=5_6,5
=
i
J
J
[] Sew the front bartack and left row, then stop.
[] Click the buttonhole lever toward you.
J
[] Sew the back bartack and right row, then stop the
machine at the starting point.
To cut the opening and to reset for sewing the next
buttonhole, refer to instructions [] and [] on
page 80.
J
-x
J
82