Manual

I
Washing Procedures (continued)
I
Do not loaditemsabove
top row of holesin wash tub.
Built-In Fabric Softener Dispenser
(somemodels)
Built-InFabricSoftenerDispenser
(some models)
RemovableFabricSoftener Dispenser
(somemodels)
Safety Lid Lock
:/
i
&
7.
&
.
Add laundry load to washer.
• Dry loadlevelshould not be higher than top row of bolesinwashtub.
Do not overload washer.
• Do not put items on top of agitator or wrap them around it. Loaditems
evenly.
• Combine large and smallitems in aload. Loadlarge items first. Largeitems
should not be more than half the total wash load.
• When washing asingle heavy item, add 1or 2 towels to balance the load.
If desired, add liquid fabric softener to Fabric Softener
Dispenser (some models).
For models with a built-in dispenser (see picture to the left):
1. Add liquidsoftener to the dispenser,following fabricsoftener labeldirections.
2. Add water to bring liquid level to fill line on dispensercap.
3. Removethe dispenserfrom the agitator after each use.Rinseboth cap and
cup with warm water. Replacedispenser in the agitator.
NOTE:Toseparatecapfrom cup,put thumb into dispenserandpush againstside
of cup (seepicture to the left). After cleaning, push cap and cup firmly together.
Replacedispenserby lining upthe ribsand groovesandsnapping it into position.
Fabric softener will be flushed from area under the built-in fabric softener
dispenserwhen LargeLoadWater Levelisselected.Ifabuild-up of fabric softener
occurs, cleanwith hot water. DO NOT REMOVE SERVICECAP.
Formodels with a removable dispenser (seepicture below to the left):
1. Attach fabric softener dispenserto top of agitator by pressingdown gently.
2. Add softener to the dispenser,following fabric softener label directions.
3. Add water to bring liquid level to top of the peg in the center of the cup.
4. Removethe dispenserfrom the agitator after each use. Rinseboth lid and
bowl thoroughly with warm water. Reassembleand place dispenser on
agitator or store it nearby.
Formodels withouta fabricsoftenerdispenser, follow fabric softener label
directions. Add diluted fabric softener to the final rinse. Do notpour fabric
softener directly on the wash load.
Set cycle selector knob and washer controls according to
type, size, and soil level of each load, and detergent used.
see operating Instructions for your specific model controls•
Start the washer.
Close the washer lid and pull out the cycle selector knob• The washer will not
agitate or spin with the lid open.
• To stop the washer, push in the cycle selector knob.
• To change a cycle, push in the cycle selector knob. Turn it clockwise to the
desired setting• Pull out the knob to restart the washer.
10. Remove items when the cycle is completed.
For your safety, the lid locks when the tub isspinning. It will remain locked for
about 1 minute after the tub stops spinning.
• To openthe lidduring a spin,push in the cycleselector knob andwait about
1 minute for the lid lock to release.Do not force open the locked lid.
Placewashed items in automatic dryer, line dry, or dry flat asdirected by fabric
care label. Excesswrinkling, color transfer or odors may develop in items left in
the washer after the cycle has ended.
_To avoid serious personal injury, do not operate washer if safety lid
lock is missing or damaged.