Owner's Manual
REFRIGERATOR
INSTALLATION
HOW TO REPLACE DOOR HANDLES
NOTE: Handle
appearance
may
vary
from
the illustrations on this page.
1. Replacing Refrigerator Door Handle
• Place the handle on the door, fitting it over the
mounting fasteners and tighten the set screws
with a
3/32" (2.5mm) Allen wrench.
NOTE: If the handle mounting fasteners need
to be tightened or removed use a
1/4" (6.4mm)
Allen wrench.
2.
Replacing Freezer Drawer Handle
• Place the handle on the door, fitting it over the
mounting fasteners and tighten the set screws
on
the
bottom of the
handle with a 1/8"
(3.1
mm) Allen
wrench.
NOTE: If the handle mounting fasteners need
to
be
tightened
or
removed use a
114"
(6.4mm) Allen
wrench.
A WARNING
When assembling
or
disassembling the handles:
·Grasp
the handle firmly
to
ensure it will not drop or
cause injury.
• Prevent the handle from swinging toward nearby
people or animals.
• Insert
the bracket hole
of
the handle into the stopper
bolt of the door exactly, then assemble the set
screws to fix the
handle in place .
• Check for any gap between the door and handle
after the handle is fixed in place.
12
Mounting
Fasteners