Owner's Manual Manual del Propietario ® ROOM AI CONDITIONER ACONDICiONADOR DE AIRE DE VENTANA Model, Modelo Sears, Roebuck www.sears.com 580. 72089 and Co., Hoffman Estates, IL 60179 U.S.A.
TABLE OF CONTENTS WARRANTY SAFETY Features ................................................................ 10 .............................. 2 .............................................................. 2 ................................ 10 Display ........................................................... t 1 3 .................................................................... Using the Air Conditioner Remote Control ..............................................
iMPORTANT SAFETY INSTRUCTIONS The safety instructions below will tell you how to use your room air conditioner to avoid harm to yourself or damage to your ROOM AIR CONDITIONER. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and ]iquidsin the vicinity of this or any other appliance.. Read product labels for flammability and other warnings. _ PREVENT Avoid fire hazard or electric shock.. Do not use an extension cord or an adapter plug.. Do not remove any prong from the power cord..
OBSERVEALLLOCALCODESAND ORDINANCES. _WARNING DO NOT_UNDER ANY CIRCUMSTANCES_ REMOVETHEPOWERSUPPLYCORD GROUND PRONG. ELECTRICAL GROUND THIS APPLIANCE. A 115-vott 60 Hz, properly grounded A time delay fuse is recommended. IS REQUIRED ON AC only, 15A fused and electrical supply is required, or time delay circuit breaker Use a dedicated circuit, RECOMMENDED GROUNDING Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter, serving only this appliance.
INSTALLATION INSTALLATION REQUIREMENTS HARDWARE Your air conditioner wil! instalfinto standarddouble hung windowswith actuatclear openingwidths of 25 to36 inches (635mm to 914rnrn)(FIG t) Lower sash must open sufficiently to allow a clear vertical opening of 15 inches (381mm). Side louvers and the rear of the air conditioner must have clear air space to allow enough airflow through the condenser for heat removal. The rear of the unit must be outdoors, not inside a building or garage.
INSTALLATION Upperguide Pick a location which will allow you to blow the cold air into the area you want.. Windows used for installation must be strong enough to support the weight of the air conditioner. Good installation with special attention to the proper position of the unit will lessen the chance that service wilt be needed. ITEM E L When cooling more than one room, installation locationis very important, To cool your rooms, cold air must be blown from the air conditioner in a straight path.
Q Select the position that wilt place the sill supports near the outermost point on sill (FIGo 10) Attach the sill supports to the cabinet track hole closest to the selected position using screw (ITEM E). Lower guide , ,, _. _, _] Attach the L BRACKET (ITEM J) with screw (ITEM G)., (FIG, 14) / ]II ,TEM _& _ ' / FIGo 14 'N CaNnel _] DRAINAGE Be sure to insertthe drain pipe into base pan before installation.
_ FRONT INSTALLATION Top of wood strip should be approximately 3/4" higher than the storm window frame to help condensation to drain properly to the outside • Install a second wood strip (approximately 6" long by 1V2"wide and same thicknessas first strip) in the center of the outer sill flush against the back of the inner sill Screw the L brackets into thisstrip This will raise the L bracket as shown in F1G 22, Install the front grille(packed separately) onto the cabinet as follows: • Hook upper tabs of
HOW AND WHY Your room air conditioner provides the following functions to make hot weather living more comfortable: -- Compressor The modern high efficiency compressor may have a high pitched hum or pulsating noise that cycles on and off. • Cools and circulates room air.. ° Lowers humidity by removing excess moisture.. • Filters out summertime dust, dirt, and some airborne impurities.
USING THE AIR CONDgTIONER FEATURES r!'_i_-[_ TO reduce the risk of fire, electric shock, or injury to persons, read the important SAFETY instructions section before operating this appliance To begin operating the air conditioner installation, follow these steps: after 1. Plug in the air conditioner. (To prevent electrical hazards, do not use an extension cord or an adapter plug..) 2. Set the exhaust vent to the CLOSE position.. 3. Set the TEMP Control to the coolest setting.
DISPLAY FAN SPEED • Every timeyou push this button, it advancesthe setting as follows: {High-, Low -, Med-, High} /r__-'_-;_ _ _-" -- REMOTE SIGNAL PbAS MAire " (.MODE _'-_NQ _ _ ; po_ [ RECEIVER f- POWER | o To turn theair conditionerON, | push the button.To turnthe air conditionerOFF,push the button again - This buttontakespriorityover any otherbutton ._- .___ CONTROL _ air conditioneris on the .
REMOTE CONTROL NOTE: The Remote Control will not operate properly if strong light shines on the sensor window Conditioner or if there are obstacles between the Remote Control and the Air Conditioner,, of the Air Every time you push button, you will hear a beep from the Air Conditioner° POWER • To turn the air conditioner ON, push the button To turn the air conditioner OFF, push the button again This button takes priority over any other button When you first turn it on.
AiR FILTER CLEANING To ensure continued peak efficiency, the condenser coils (outdoor side at the unit) should be checked periodically and cleaned if they become clogged with soot or dirt from the atmosphere. Brush or vacuum exterior coils to remove debris from fins.
BEFORE CALLING FOR SERVICE Check the following list to be sure a service call is realty necessary help you avoid an unneeded service call THE AIR CONDITIONER Check A quick reference to this manual may WILL NOT OPERATE Then... if,.. Wail plug disconnected. House fuse bbwn or circuit breaker t_iDPed. Poweris OFF. Unitwas turnedoff and lhen on too quickly. TEMP Controlset warmer lhan roomtemperature. _ ush p!ug firmlyinto wail outlet. Replaceluse with time dela2/_lypeor resetcircuit breaker.
-!5-
Room Air Conditioner To order' Parts call Toll Free Model No. 580.72089200 CAUTION: 1-800-4-MY-HOME Use the Kenmore CABINET part number & FRONT on all orders, GRILLE 3-A 6-A 5-A 1-A 12/01 - 16- (1-800-469-4663) not the illustration ASSEMBLY number.
580 72089200 CAUTION: Use the Kenmore CABINET ILLUSTRATION part number & FRONT on all orders, not the illustration GRILLE number ASSEMBLY PART NUMBER DESCRIPTION 1 _A 3530A20043A FRONT 2-A 3530A20046A INLET GRILLE 3 _A 5231A20006A AIR FILTER ASSEMBLY 4-A 4458A20019A VANE 5 -A 4758A20016A LOUVER 6 -A 4758A20016B LOUVER 7 -A 3091AR2317J CABINET 8 -A 4974AR3328C UPPER GUIDE 9-A 3850A20242S LABEL, ENERGY 3828A20133P MANUAL OWNER'S NUMBER # = Functional GRILLE ASSEMBL
580 72089200 CAUTION: Use the Kenmore part number CONTROL IO-B 9-B _ on all orders, not the illustration number,, BOX ASSEMBLY 3-B 6-B .......
580,72089200 CAUTION: Use the Kenmore part number on all orders, not the illustration number,, CONTROL PART NUMBER DESCRIPTION 4994A10029A CONTROL 2-B 3720A10061A PANEL CONTROL 3-B 3550A30114A COVER CONTROL 4-B 6871A20167A PWB ASSEMBLY, AC 5-B 6871A20168B PWB ASSEMBLY DC 6-B 6120AR2359V CAPACITOR 7-B 6609A10003G H,,V ASSEMBLY 6411A20011F POWER CORD ASSEMBLY 9-B 6323A20004D THERMISTOR ASSEMBLY 10-B 6631AR3843U CONNECTOR ASSEMBLY 11 -B 6850A90001G CABLE FLAT 12-B 6631A3
580,72089200 CAUTION: Use tl3e Kenmore part number AIR HANDLING on atl orders, not the illustration number.
580.,72089200 CAUTION: Use the Kenmore part number on all orders, not the illustration AIR HANDLING PARTS PART NUMBER DESCRIPTION 1-C 3041A20021N BASE PAN WELD ASSEMBLY 2-C 5238A20007A AIR GUIDE LOWER 3-C 4681A20027X MOTOR 4-C 5900A20020A FAN, TURBO ILLUSTRATION NUMBER # = Functional & CYCLE number.
58072089200 CAUTION: Use the Kenmore part number on all orders, no__tt the illustration COMPRESSOR © 8-D number.
580 72089200 CAUTION: Use the Kenmore part number on all orders, not the illustration COMPRESSOR ILLUSTRATION NUMBER PARTS PART NUMBER DESCRIPTION 4984AR4335A ISOLATOR, 5416Ag0007A COMPRESSOR 3 _D 4810AR4155B BRACKET, WASHER 4 - D 1NHA0801206 HEXAGON NUTS 5 - D 4986A30001A GASKET 6750A30001 N OVERLOAD 7- D 3550A30048A TERMINAL 8 -D 4H01058A GASKET 9 -D 4H00947A TERMINAL 10 - D 5211A10074D TUBE ASSEMBLY DISCHARGE t1- D 5211A20228F TUBE ASSEMBLY SUCTION 12 - D 5211A2
58072089200 CAUTION: Use the Kenmore part number mNSTALLAT_ON I ! 2/01 i !, on all orders, not the illustration KIT ASSEMBLY number,
580,72089200 CAUTION: Use the Kenmore part number INSTALLATgON ILLUSTRATION NUMBER # = Functional on all orders, nott the illustration number.
INDICE DE MATERIAS GARANT{A ................................................ SEGURIDAD Ca_acte risticas .............................. 26 26 ....................................... 34 Uso del equipo de aire acondicionado ,34 Despliegue ............................................ Contro remoto ...................................... 35 36 ........................................................ 27 MANTENIMIENTO lmportantes instruccionesde seguridad .....27 .......................................
IMPORTANTES INSTRUCCIONES DE SEGURIDAD Las siguientes instrucciones de seguridad le indicaran c6mo usar su equipo de aire acondicionado de habitaci6n para evitar dafios para usted mismo y para su EQUIPO DE AIRE ACONDICIONADQ _ PeR SU SEGURIDAD No almacene ni use gasotina u otros vapores y Iiquidos inflamables cerca de _ste e cualquier otro electrodemestico, Lea las etiquetas de los productos para ver si contienen advertencias sobre el carActer inftamabte de los mismos y otras advertencias+ _i_ Evitelos
RESPETE TODOS LOS CODIGOS Y REGLAM ENTOS. ADVERTENClA BAJO NINGUNA ClRCUNSTANCIA CORTE, QUITE O EVITE EL USO DE LA CONEXION A TIERRA DE ESTA CLAVIJA. ESTE APARATO NECESITA SER CONECTADO A TIERRA. Se requiere una a]imentaci6n ei_ctrica CA, adecuadamente conectada a tiena con un fusible Petigro de cheque electrico de t5 A, de 60 Hz y de 115 V..
REQUERINII, ENTOS tNSTALACION INSTALACI6N PARA PIEZAS DE MONTAJE Su equipo de aire acondicionadose instalar,&en ventanas estandar de doble panelcon anchosde aberturalibre de 635 mm a 914 mm {25 a 36 puigadas) (Figura 1) El marco inferiordebe abrirseto suf_cientepara perrnitir una aberturaverticallibre de 381 mm (15 pufgadas).
INSTALACK)N Escoja un lugar que le permita Ilevar et aire fdo al area que desea Las ventanas que se usen para la instataci6n deben toner Jaresistencia suficiente para soportar el peso del equipo de aire acondicionado Una buena instalaci6n con atencion especial a la correcta posici6n de ]a unidad disminuir,_la probabilidad de que sea necesario efectuar reparaciones. Cuando se desea enfriar m_s de una habitaci6n, la instalaci6n es muy importantepuesto que el aire frio no dobta esquinas.
_ Seleccionela posici6nen la que cotocarae! soporte de antepechocerca del puntomas externoen el antepecho(Figura 10) Fije el soporte de antepechoal odficiodel cardl del gabineteen relaci6ncon la posici6n seleccionadausandoet tornitlo(fTEM E) _I ] iTEM E Guia ir#erior []Code la cinta de espuma para que tenga fa Iongitud eorrectae ins6rtelaentre el marco superiorde la ventana y et marco inferiorde la ventana.(Figura 14) G iTEM # . - -.
[] INSTALAClON FRONTAL Insta]e la rejilla frontal con el gabinete de la siguiente manera: ° Tire de la rejilta frontal hacia debajo desde la parte superior del gabinete ° Empuje las puntas de la rejilfa frontal hacia et gabinete para insertar las leng etas de la rejilla dentro del gabinete, o Abra la rejilla de entrada o Apriete el tomillo (ITEM E) a traves de la rejilla frontal fijAndolo al recipiente de base o Cierre la rejilla de entrada de la contraventana, Yea la Figura 22r La parte superior del list
c6Mo Y PORQUE Enocasiones, el usede MEDFANparahacercircularetaimper tahabitaci6n hacequeel ambienteseamaseonfortable aun cuandoel equiponoest_enffiandoel aire Mientras m_s|iempo y conmayortrecuencia funcioneel equipode aire acondidonado, maseleeWcidad consumir_ y mayoresseranlos costosde suuse Su equipo de aire acondicionado de habitaci6n bdnda las siguientes funciones para hacer que la vida en ctimas calidos sea mas conferrable: o Enfria y hace circular el aire per la habitaci6n • Disminuye la humedad el
CARACTERiSTICAS USO OEL EQUIPO DE AIRE ACONDIC!ONADO _Para reducir el riesgo de incendio, descargas electrica o tesiones personales, tea las IMPORTANTES INSTRUCC]ONES DE SEGURIDAD antes de operar este aparalo, Para comenzar a utilizar el equipo de aire acondicionado, siga estos pasos: 1. Enchufe el equipo de aire acondicionado, (Para prevenir riesgos de descargas el_ctricas, no use un cable de extensi6n ni un enchufe adaptador ) 2, Ajuste el extractor de aire en la posici6n CLOSE 3.
DESPLIEGUE VELOClDAD DEL VENTILADOR *Cada vez que presione este bot6n, el ajuste es como sigue: {Alto -, Bajo -, Medio _ Alto} _- "- RECEPTOR DE SEI_AL ENECNDIDO/APAGADO ,, Para ENCENDER el sistema presione el bot6n, y para APAGARLO presione e! bot6n otra vez. • Este bot6n tiene prioridad sobre todos los otros botones. ,, Cuando Ud..
CONTROL REMOTe PrecauciOn: El dispositiovo de control remote no funcionara adecuadamente si la ventana sensora del acondicionador de aire es expuesta a luz fuerte, o si hay obstacutos entre el dispositivo de control remote y el acondicionador de aire, Cuando opere el aire acondicionado con el control remote, deber,_ air un pito, ENECNDIDOIAPAGADO • Para ENCENDER el sistema presione el botOn, y para APAGARLO presione el bolOn otra vez ...
LIMPIEZA DEL FILTRO DEL AIRE EIfiltrode[aire se ir_ ensuciandoa medidaque va atrapandoel po]voprovenientedel aire interior Es prec,isolavar el filtro del aire al menoscada dos semanas S[ el filtro de] aire permanecelieno de polvo,el flujode aire disminuir_y se reducir&la capacidadde enfriamientodetequipo, conposibles daSospara la unidad (Figura28) • Tire de la rejilla de entradahacia delanteagarrando ambaslong,eras y tire del tiltro dot aire hasta sacaflo , Laveel filtro del aire en agua tibia a Aseg0rese d
ANTES DE LLAMAR PARA SERV!Cm.O Cheque la siguiente lista pare asegurarse si en realidad es necesario este manual puede evitar una tlamada para servicio innecesaria EL EQUIPO DE AIRE ACONDIClONADO liamar para servicie. Una referencia rapida a NO FUNClONA. El enchufeno es_ conedade en _atomede corden[ede pared. Conedael enchutel#memenleen la lama de conientede pared.
Get fixed, at your home or ours! For repair of major brand appliances in your own home. no matter who made it, no matter who sold it! 1-800-4-MY-HOME o ® Anytime, day or night (1-800-469-4663) www.sears.com For repair of carry-in products like vacuums, lawn equipment, and electronics, call for the location of your nearest Sears Parts and Repair Center. 1-800-488-1222 Anytime, day or night _rww.sears.