Manual
Thedehumidifiermaybeoperatingabnormallywhen:
Dehumidifier
doesnotstart
Dehumidifierdoes
notdrytheairas
it should
Dehumidifierseems
toruntoomuch
Frostappearson
thecoils
Wateronfloor
Dehumidifier
operates
continuously
•Makesurethedehumidifierplugispushed
completelyintotheoutlet.
•Checkthehousefuseorcircuitbreakerboxand
replacethefuseorresetthebreaker.
•Thedehumidifierautomaticallyturnsoffwhen
thisoccurs.Emptythebucket.
•Makesurethebucketisintherightplace.
•Pressthe@ humiditycontrolbuttonto
lowerthehumiditysettingbelowroomlevel.
• Unit has 2 minute delay once power is restarted.
• When first installed, allow at least 3 or 4 days to
achieve and maintain the desired dryness.
• Make sure there are no curtains, blinds or
furniture blocking the front or back of the
dehumidifier.
• Press the @ Humidity Control button to
lower the humidity.
• Check that all doors, windows and other
openings are securely closed.
• Install the dehumidifier away from the dryer.
The dryer should be vented to the outside.
• The50pintmodel(54501)maynotoperateefficientlyif
theroomtemperatureis below65°F(18°C).
• The 70 pint Low Temperature model(54701) may
not operate efficiently if the room temperature is
below 42 F(6°C).
• Refer to the Selection Guide on page 6.
• Close all doors and windows to the outside.
• This is normal. Frost will usually disappear within
60 minutes.
• Ensure that the room temperature is at the
minimum of 65°F(18 C) or 42°F(6°C).
• Check the hose if one is attached.
• Ensurebucket isproperlypositioned.
• Press@ toraisehumiditysettingto 35%or above.
See page 7.
[ Press the @ humidity control button to change
the humidity higher setting than room level,
highest humidity is 70%.
-11 -