__ARS OWNERS MANUAL MODEL NO. 625.347030 UNIVERSAL Undersink Reverse Osmosis HOME DRINKING WATER SYSTEMS HOW TO INSTALL HOW IT WORKS CARE OF REPAIR PARTS SAVE THIS MANUAL _: PRINTED IN U.S,A.
TABLE OF CONTENTS Safety Guides ............................................... What Your Home Drinking Water System Will Do ..................... Things To Check Before You Start To Install ....................... How To Install Your Home Drinking Water System .................. .2-3 3 4-5 5-9 How Your Home Drinking Water System Works ................... Care Of Your Home Drinking Water System ..................... Remote Location For The RO ....................................
! SAFETY GUIDES NON-POTABLE WATER SOURCES. DO NOT USE THE SYSTEM ON MICROBIOLOGICALLY UNSAFE WATER, OR WATER OF UNKNOWN QUALITY. _CHECK WITH YOUR LOCAL PUBLIC WORKS DEPARTMENT FOR PLUMBING AND SANITATION CODES. YOU MUST FOLLOW THEIR GUIDES AS YOU INSTALL THE SYSTEM. FOLLOW YOUR LOCAL CODES IF THEY THIS MANUAL. DIFFER WITH GUIDES IN The Home Drinking Water System works on water pressure of 40 psi (minimum) to 125 psi (maximum). See the table on page 15.
THINGS TO CHECK BEFORE YOU START TO INSTALL • PARTS IN THE SHIPPING CARTON 1 WASTE -- Unpack the carton carefully so needed parts are not discarded by mistake. Included II I DRAIN II CLAMP ', ,, are: RO WATER SUPPLY SADDLE VALVE ,_ASSEMBLY I WATER C \X', TOP COVER FAUCET ASSEMBLY filter carbon cartridge removes chlorine from water before it enters the RO membrane. • WATER SUPPLY -- The cold water supply to your Home Drinking Water System must be within certain chemical limits (see page 15).
I THINGS TO CHECK BEFORE YOU START TO INSTALL REMOTE LOCATION -- You can install the RO assembly or water supply saddle valve in another place away from the RO faucet 14). F (please see page HOW TO INSTALL STEP 1 -- INSTALL REPLACING ANOTHER RO SYSTEM -- We suggest you remove all parts of another RO system, and use everything included with your new RO system.
HOW TO INSTALL continued YOUR HOME DRINKING WATER SYSTEM from page 5 NOTE: If you have to drill a 118" diameter hole, hold 4. Turn the valve handle inward to make a hole in the valve with clamp A up to the pipe and mark the spot to drill. BEFORE DRILLING, READ THE DANGER NOTE ON PAGE 5. the copper or plastic pipe. DO NOT TURN ON THE WATER SUPPLY AT THIS TIME. 3. Place the seal on the inside of clamp A as shown.
HOW TO INSTALL YOUR HOME DRINKING WATER SYSTEM STEP 3 -- PREPARE MOUNTING HOLE, ASSEMBLE FAUCET AND INSTALL A. PREPARE MOUNTING HOLE. BEYOND REPAIR, CONSULT A QUALIFIED PLUMBER OR INSTALLER FOR GUIDES BEFORE DRILLING HOLES IN PORCELAIN OR. STAINLESS STEEL. 1. Pick I of the following places for the faucet where it will fit flat against the surface. Be sure you have room underneath for the tubing connections (FIG. 5, page 8). •..drill a hole (1-1/4" diameter) in the countertop next to the sink. •..
HOW TO INSTALL YOUR HOME DRINKING WATER SYSTEM J STEP 4 -A. CONNECT CLAMP TUBING, FAUCET MAKE REMAINING TO DRAIN B. CONNECT 5 and 7) Looking at FIG. 5, run the 3/8" x 27" tubing from at the drain clamp, with a 3/8" CONNECTIONS TUBING TO WATER SUPPLY (FIG. Use the tubing insert, ferrule and nut, at the water supply saddle valve, to fasten the-remaining 1/4" tubing (marked "WATER SUPPLY"). Tighten_tl_. nut with a wrench. theRO faucet, to the drain clamp at the sink p-trap, FIG. 6.
I HOW TO INSTALL YOUR HOME DRINKING in the RO system. At that time, carefully check all fittings and tubing connections for any water leaks. Correct leaks if any are found. E. IMPORTANT PURGING I I HOW YOUR HOME DRINKING Water from the cold supply pipe saddle valve is directed through 1/4" tubing, to the RO prefilter. NOTE: If the optional Electronic Monitor, Sears Stock No.
I HOW YOUR HOME DRINKING WATER WORKS i"-" POSTFILTER - continued • FLASHING cartridge REPLACE water. High quality drinking water flows from the postfilter and to the faucet. NOTE: FAUCET - The sinktop or countertop faucet dispenses the drinking water. It has a hand operated, spring loaded lever to keep the faucet closed and to prevent waste. You can keep the faucet open by pushing upward on the lever and MONITOR - The RO membrane needs replacing. BATTERIES...
I CARE OF YOUR HOME DRINKING WATER PREFILTER CARTRIDGE - You must replace the prefilter cartridge often to protect the RO membrane from being destroyed by chlorine0 and/or from plugging with sediments from the water supply. If you have chlorine in the water, replace the cartridge at least every 6 months. If the prefilter cartridge plugs with sediments, water flow into the RO system drops, slowing the making of quality RO water.
I CARE OF YOUR HOME DRINKING RO MEMBRANE of the membrane CARTRIDGE - The useful life cartridge depends mostly on the pH (see page 15) of your supply water. The lower the pH, the longer the membrane will last. For example,, if the feed water has a pH of about 7.0, the cartridge may last for over I year; but if the pH is high, cartridge life may be shortened. The high pH weakens the membrane and makes pin hole leaks.
CARE OF YOUR HOME DRINKING 7. Install the RO housing, push downward rotate 900 clockwise to lock in place. "-SANITIZING and 10.DO THE replace the vacuum SANITIZING PROCEDURES, AUTOMATIC PAGE AND PURGING 8. SHUTOFF THE RO SYSTEM-- Sanitizing is recommended upon installation of the RO system, and after servicing inner parts of the RO housing, and cap. IT IS IMPORTANT FOR THE SERVICE PERSON TO HAVE CLEAN HANDS WHILE HANDLING INNER PARTS OF THE SYSTEM. 8.
1 CARE OF YOUR HOME DRINKING WATER SYSTEM RO CARE GUIDE MODEL NO. 625.347030 WITH OPTIONAL 1. AT LEAST every 6 months, or g00 gallons of product water use, replace the prefilter cartridge and postfilter. Clean or replace the flow control and screen. Also clean or replace the water supply inlet screen. MONITOR, SEARS STOCK NO. 42-,34704 1. Replace the prefliter cartridge and postfilter when the amber "FILT" light begins to fesh while taking product water from the RO faucet.
I DIMENSIONS -- SPECIFICATIONS ,m----'-----10 1/2"_ F 21 1/2" Supply water pressure limits Supply water temperature limits Maximum total dissolved solids ('FDS) Maximum water hardness @6.9 pH Maximum iron, manganese, hyd. sulfide Chlorine in supply water (SEE PAGE 4) Supply water pH limits Product (quality) water, 24 hm.* Waste water per gal. product water, 24 hm." Percent rejection of TDS, minimum (new membrane)" Storage capacity Product water vending flow 40-125 PSI 40-100OF 2500 PPM 10 GPG 0 Max.
I REPAIR PARTS SEARS HOME DRINKING WATER SYSTEM Undersink MODEL NO. 625.347030 Reverse Osmosis 30 t 27 7 37 23 13(b) € \ 2°4 8/ l_ 38 15 / / 1_----_.__ 39 16 ......
REPAIR PARTS SEARS HOME DRINKING KEY NO. PART NUMBER DESCRIPTION 1 7095925 2 WATER SYSTEM Undersink MODEL NO. 625.347030 Reverse Osmosis KEY NO. PART NUMBER DESCRIPTION Faucet 30 7124986 Elbow, 114" NPT x 1/4" Tubing 1260600 Washer 31 7125932 Diaphragm Kit (_ 3 7064144 Adaptor (Incl. Key No. 2 and 4) 32 7113846 Support, Plunger 4 9043201 Nut, 3/8" Tubing 33 7113838 Plunger 5 7079791 Saddle Clamp (drain) 34 7124677 Top Support 6 9003203 Nut, 3/8" Tubing (4 req.
Universal Undersink Reverse Osmosis SEARS HOME DRINKING WATER SYSTEMS OWNERS MANUAL SERVICE MODEL NO. 625.347030 Now that you have purchased your Sears Home Drinking Water Syst should a need ever exist for repair parts or service, simply contact any S= Service Center. Be sure to provide all pertinent facts when you call or The model number of your drinking water system is found on the rating d_ This decal is on the side of the RO Liner Assembly.