Installation guide

Direct Wire—Connect
remaining wires
NOTE: Do not pre-twist stranded wire. Twist on UL listed/CSA
approved wire connector. Gently tug on wires to be sure both
are secured.
Connect wires black to black and white to white, using UL
Listed /CSA Approved twist-on wire connectors (not included).
Wiring configuration
Power supply wire: Terminal box wire:
white = white
black <«———»- black
ground wire ~<«<——»- ground connector
4 | Direct Wire—Secure cable
in strain relief
22
Tighten strain relief screws to secure cable.
Direct Wire—Reinstall
terminal box cover
T
B
pn
fe
om
Place wires inside terminal box. Insert tabs on left side of cover.
Make sure wires are tucked inside box. Close cover ensuring
wires are not pinched. Use 4" nut driver and previously
removed screw to secure cover.
Double-check dishwasher
alignment in cabinet opening
J
Check that dishwasher is still level front-to-back and side-to-
side in cabinet opening.
IMPORTANT: If you have solid countertops such as
Corian™ granite, etc., you must use side mounting kit (Part
Number 8212560). Follow kit instructions. (Brackets included
with kit.)
t®Corian is a registered trademark of E.l. Du Pont De Nemours and Company.