Installation guide

? Put dishwasher on its back
Using two or more people, grasp sides of dishwasher door
frame and place dishwasher on its back.
3} Remove panel and fasteners
% Unlocked
Locked
VY = !
turn
~
We N
ae
Using a flat-blade screwdriver, turn the plastic fasteners /% turn
counterclockwise to unlock them. Remove the panel. Do not
remove tech sheet from access panel.
4.| Remove terminal box cover
Using a 4" hex head socket, nut driver or Torx® T20°
screwdriver, remove terminal box cover. Retain for later use.
12
5 | Install strain relief
V
a |
| \ So
SS
a
OD 4
. SZ
ce
Install a UL Listed/CSA Approved strain relief. Make sure
screwheads are facing to the left when tightening conduit nut.
Strain relief is provided with the power supply cord kit.
What type of electrical
connection will you use?
_ Power Supply Cord:
~Follow Option.A instructions
“Direct Wire:
.. Follow Option B instructions
NOTE: If using Option B, proceed to “Determine Cabinet
Opening,” to continue with the installation of your dishwasher.
e
he Make Power Supply Cord Connecti
Option A, Power Supply Cord:
1 | Power Cord—Route cord
into terminal box
Route cord so that it does not touch dishwasher motor to lower
part of dishwasher tub. Pull cord through strain relief in terminal
box.