Installation guide

INSTALLATION INSTRUCTIONS
°
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
| 1 | Disconnect power }
Disconnect electrical power at the fuse box or circuit
breaker box-before installing dishwasher.
2 | Shut off water supply |
Shut off the water supply to the dishwasher. |
Do you already have utility
hookups?
Yes —Follow instructions in the “Prepare Cabinet
Opening—Existing Utilities” section.
No —Follow instructions in the “Prepare Cabinet
Opening—New. Utilities”: section.
: Existing utility hookups No existing utility hookups
\
Water line
Dw aw 0eme, 0 palm
Prepare Cab
Check water and electrical
placement
il
Water line
If the water line and the cable extend to the locations shown,
proceed to the “Install Drain Hose” section. If they do not reach
far enough, follow the instructions in the “Prepare Cabinet
Opening—New Utilities” section.
Geer pape, C relearn’ (nerve ent Aelia me
Prepare Cabinet Opening—New Ulilities Me
Prepare and route the electrical supply
What type of electrical
connection will you use?
~ Power-Supply.Cord:
~ Follow Option A instructions
Direct. Wire:
Follow Option B instructions
Option A, Power Supply Cord:
NOTE: A grounded 3 prong outlet is required inside a cabinet
next to the dishwasher cabinet opening.
1 | Power Supply Cord—Drill hole
~
Opiional location
Preferred location
Drill a 11%" (3.8 cm) hole in cabinet side or rear.
See “Product and Cabinet Opening Dimensions” section.