Manual

Combo Cup shelves
Fold down the extra shelves on the right-hand side of the top
rack. Use the Combo Cup shelves to hold a variety of items.
• Hold additional cups and/or stemware in the Stemware
Rests.
The bottom rack is designed for plates, pans, casseroles, and
utensils. Many items, up to 11 in. (28 cm) tall, fit in the bottom
rack. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
Hold lightweight plastic lids in place in the Lid Holders. Or
you can place long items such as utensils and spatulas on
the Combo Cup shelf.
Place knives, sharp-edge down in the Knife Holder.
1o Flip up the front Knife Holder so the word HANDLE faces
you.
10 place setting
• Do not load glasses, cups, or lightweight plastic items in the
bottom rack. Load small items in the bottom rack only if they
are secured in place.
• Load plates, soup bowls, etc., between tines.
• Overlap the edges of plates for large loads.
• Load soup, cereal, and serving bowls in the rack in a variety
of ways depending upon their size and shape. Load bowls
securely between the rows of tines. Do not nest bowls
because the spray will not reach all surfaces.
2. Flip up the rear Knife Holder so the word BLADE faces
you.
3. Place knives in the holder as shown.
NOTE: Always point the knives to the rear of the Knife Holder
with the blades down.
12 place setting
• Load cookie sheets, cake pans, and other large items at the
sides and back. Loading such items in front can keep the
water spray from reaching the detergent dispenser.
• Secure heavily soiled cookware face down in the rack.
• Make sure pot handles and other items do not stop rotation
of the spray arm(s). The spray arm(s) must move freely.
• Do not load items between the bottom rack and the side of
the dishwasher tub because they might block the water inlet
opening.
NOTE: If you have removed the bottom rack for unloading or
cleaning, replace it with the bumpers in front.