Installation guide

Grasp aluminum filter screen by the tab @ and insert tab
end of filter into cabinet opening, Slide towards the
center of microwave hood. Insert other end of filter into
opening and slide entire filter towards the side of the
microwave hood until filter is securely in position, Repeat
for other filter.
Remove tape from door.
Go to step 6.
Sujete la malla del filtro de aluminio por la lengOeta® e
inserte el extremo de la lengOetadel filtro en la abertura del
gabinete. Desficelohacia el centro de la campanadel homo,
Inserte el otto extremo del filtro en la abertura y deslice todo
el filtro hacia el lado de la campana del homo hasta que el
filtro quede bien asegurado en su lugar. Repita el
procedimiento parael otro filtro.
Quite la cinta adhesiva de la puerta.
Vayaal Paso 6.
Grasp aluminum filter screen by the tab ® and insert tab
end of filter into cabinet opening. Slide towards the
center of microwave hood. Insert other end of filter into
opening and slide entire filter towards the side of the
microwave hood until filter is securely in position. Repeat
for other filter.
Remove tape from door.
Go to step 6.
Sujete la pantalla del filtro de aluminio por la lengOeta@ e
inserte el extremo de la lengOetadel filtro en la abertura del
gabinete. Deslicelohacia el centro de la campanadel homo.
Inserte el otro extremo del filtro en la abertura y deslice todo
el filtro haeiael lado de la campanadel homo hasta que el
filtro quede bien aseguradoen su lugar. Repitael
procedimiento parael otro filtro.
Quite la cinta adhesivade la puerta,
Vaya al Paso 6.
Plug power cord into grounded outlet.
Reconnect power supply.
Enchufeel cable de alimentaciOnen el tomacorrientepuesto a
tierra. Vuelnaa conector el suministrode energia.
Read the Owner's Manual, then check the operation of
microwave hood.
Lea el Manual del Propietario, luego verifique el
funcionamiento de la campana de salida de aire del homo de
microondas.
t9