Manual

TO REPLACE BELT
Loop the new belt on the motor shaft.
Belt
Pulley
Belt
Note: See PARTS AND FEATURES for belt
number.
Loop the other end of the belt on the belt pulley
on the agitator.
Insert the left end cap, arrow down, into its slot
in the nozzle base. Pull the agitator forward and
insert the right end cap, arrow down, into its slot
in the nozzle base.
Note: Care must be taken due to the belt
tension during reassernbly.
Agit __
Bumper
_" Nozzle
Base Slot
End Cap
Press firmly, checking to see that each end is
completely inserted.
Check to see that the belt is centered on the
belt pulley. Turn the agitator with your fingers to
see that it turns freely.
Replacethe nozzle cover and secure the
latches.
Latches
Nozzle Cover
-15-