Installation guide

Do not remove spacers (if equipped) on the side walls and/or on the back of the bufltqn oven.
These spacers center the oven in the space provided. The oven must be centered to prevent excess heat
buildup that may result in heat damage or fire.
Door Open
(see note 2)
@75/16''(120!2
11/2 ''
(3.8 cm) Min.
i
-Jk
cm) min.
4 cm) max.
11 1/2_
Y (29.2 cm)
4.
Electrical Junction Box
(Right or left side
depending on model)
Min.
Hole for cable and electrical
junction box on left or right
side depending on model.
3" (7.6 cm)
Max.
NOTES
1. Base must be capable of supporting 300 pounds (136 kg).
2. Allow at least 19 3/8" (49.2 cm) clearance for door depth
when it is open.
3.
Dimension G is critical to the proper installation of the
built-in oven. If the oven decorative trim does not butt
against the cabinet, or if noise is heard on convection
models, verify dimension G to assure it is according to
the required dimension.
Figure 2- DOUBLE OVENS
(Single Ovens see Figure 1)
XXXXX XXXXXXXXXX
PRODUCT DIMENSIONS
MODEL A I B C. D
1-
1-
24" (61 cm)Wall Oven ] 23 7/8 (60.6) 51 1/16 (129.7) / 21 /_G(54.8) 25 1/2(64.8)
CUTOUT DIMENSIONS
All dimensions are stated in inches and cm.
2