Manual

Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also, pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
OVEN INTERIOR BAKE PAD BROIL PAD COOK TIME
LIGHT PAD Used Used to select Used to select PAD Used to
to turn oven the bake the variable enter the length
interior light ON function, broil function, of the baking
and OFF. time.
WARM &
HOLD PAD
Used to set
the Warm &
Hold feature.
the Self-Cleaning
cycle. A 2, 3 or 4
hour Self-Clean _
time may be
selected.
OVEt
STOP CLEAR PAD Used to
clear any function previously
entered except the time of
day and minute timer.
STOP CLEAR to stop
cooking. Also the STOP
CLEAR pad is used to
activate oven lockout setting.
DELAY START PAD Used to set the
desired start time for baking or cleaning.
May be used with COOK TIME to program
a delayed bake cycle.
UP and DOWN ARROWS PADS Used Oven
along with the function pads to select Light CookTime Pad
oven temperature, cook time, start time Pad
(when programming an automatic start
time), time of day, clean time and minute Bake Broil
timer. Pad Pad
CLOCK SET
PAD Used to
set the time
of day.
ADD 1 MINUTE PAD Used to add 1 minute to
the Timer Countdown. This feature works with
the Kitchen Timer only and does not affect any
cook time or start time functions.
Stop Clear Pad
Warm & Hold Pad Delay Start Pad
TIMER SET/OFF PAD Used to set or cancel the minute timer. The
minute timer does not start or stop cooking. Also, TIMER SET/OFF
Pad is used to set the Continuous Bake Feature.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold upper or lower oven @ pad. After 4 seconds, the control will beep once and "ON
OFF" will appear in the display. Press either A or v pad to change on to off or off to on. Press _ to return to the
or
time of day display.
Temperature Conversion (Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (76°C to 287°C).
To change the temperature to °C (celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press and hold the upper or lower oven pad. After 4 seconds, the control will beep once and "F" or "C" will
appear in the display.
2. Press either the A or v pad to change from °F to °C or °C to °F.
3. Press _"_ or wait 5 seconds to return to normal operating mode.