Installation guide

6.FortypicalundercounterinstallationofanelectricbuiltdnovenseeFigurebelow.
Onlycertaincooktopmodelsmaybeinstalledovercer-
tainbuiltdnelectricovenmodels.Approvedcooktops
andbuiltdnovensarelistedbytheMFGIDnumberand
productcode(seetheinsertsheetincludedinthelitera-
turepackageandcooktopinstallationinstructionsforthe
dimensions).
208/240Voltjunctionbox,
forbuiltdnoven.
Approx. 3"
(7.5 cm)
Cabinet side filler panels are
necessaryto isolate the unit
from adjoining cabinets. Cabinet
side filler height should allow for
installation of approved cooktop
models
Use3/4" (! .9 cm) plywood, installed
on two runners, flush with toe plate.
Basemust be capable of supporting
150 pounds (68 kg) for 27" models and
200 pounds (90 kg) for 30" models.
Cut an opening in wood base minimum g" x 9"
(23 X 23 cm), 2" (5 cm) from left side filler
panel, to route armoured cable to junction box.
4 1/2" (11.5 cm) Max.*
* If no cooktop is installed directly over
the oven unit, 5" (12.7 cm) maximum
is allowed above the floor.
27" (68,6 cm) 24Vs" (63,2 cm) Min. 27X" (69.2 cm) Mir/
Wall Oven 25X" (64.1 cm) Max. 23Y2" (59.7 cm) Min, 28Y/' (72,4 cm) Max.
:10" (76,2 cm) 28Y2" (72.4 cm) Min. 27X" (69.2 cm) Min.
Wall Oven 29" (737 cm) Max. 2FLY/' (59.7 cm) Min 28Y2" (724 cm) Max.
Figure 9 ° TYPICAL UNDER COUNTER INSTALLATION OF A SINGLE ELECTRICBUtLToINOVEN
WITN AN ELECTRICCOOKTOP MOUNTED ABOVE