Installation guide

IMPORTANT
Do not lift the oven by the door handle.
3. Insert the oven into the cabinet opening. Slide oven
inward leaving IY2" (3,8 cm) clearance between the oven
and front of cabinet (see Figure 6), Pull tile armored cable
through the hole for it in tile cabinet and toward the
junction box while moving the appliance inward.
J
lye" (3.8 cm)
clealance
between unit
Figure 6
4.Push the oven in and against the cabinet; the oven side
bracket will (:lip into tile mounting bracket installed into
the side of cabinet.
To pull out tile oven for servicing you must use the two
tools supplied with tile oven. Insert one tool into hole in
each side of oven frame. Holes are visible when door is
opened. After inserting tools pull the oven towards you
(see Figure 7).
5. Bottom Trim Installation:
(Note for the double wall ovens only: If the cutout height
is between 51_s/_6'' (!31.6 cm) and 51_s/_6'' (131.9 cm}
use tile larger bottom trim.)
Place the top of tile bottom trim over the side trim tabs
on each side of the oven below the oven door and fix it
using the 2 screws supplied in the mounting holes
Io(ated on each side trim below tile oven frame (see
figure 8).
Mounting
bracket
released
Oven removed
from the cabinet
Hole where to
insert the tool
Figure 7
Screws
_Bottom Trim
Figure 8