Manual
Table Of Contents
- KENMORE LIMITED WARRANTY
- Before setting oven controls
- Oven Controls
- Minimum & maximum control settings
- Setting the Clock
- Changing between 12 or 24 hour time of day display
- Setting Continuous Bake or 12 Hour Energy Saving
- Setting Oven Timer
- To Set Add 1 Minute Feature
- Setting the Oven Lockout
- Setting Silent Control Operation
- Setting Temperature display -- Fahrenheit or Celsius
- Operating Oven Lights
- Setting Cook Time
- Setting Delay Start
- Warm & Hold™
- Setting Bake
- Setting Broil
- Setting Convection Bake
- Setting Convection Roast
- Setting Convection Convert feature
- Setting the Slow Cook feature
- Cooking and Preparation tips for Slow Cook
- Restoring factory default settings
- Adjusting Oven Temperature
- Setting the Sabbath Feature (for use on Jewish Sabbath and Holidays)
- Self-Cleaning Operation
- Self-Cleaning Oven
- To Start the Self-Clean Cycle
- Stopping or Interrupting a Self-Cleaning Cycle
- Care and Cleaning
- Before You Call
22
Oven Controls
If a delay Self-Clean feature is desired, finish step 6-9.
5. Press Self-Clean. Dashes will appear in the display.
6. Enter the start time numbers 4 3 0 and press . CLEAN,
DELAY, LOCK, and DOOR will be displayed.
7. The control will start the self-cleaning at the set start time,
for the period of time previously selected. At that time, the
icon DELAY will go out.
When the self-clean cycle is completed:
8. HOT will appear in the display. The time of day, the DOOR
LOCKED and CLEAN icon will remain in the display.
9. Once the oven has cooled down for approximately 1 HOUR,
and the DOOR LOCKED icon is no longer displayed, the
oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press .
2. The oven door can only be opened after the oven has
cooled down for approximately 1 HOUR and the DOOR
LOCKED icon is no longer displayed.
Note: If your clock is set for normal 12 hour display mode the
Delayed Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delayed Self-Clean Cycle 12-24
hours in advance set the control for the 24 hour time of day
display mode.