Quick Start Guide

Stacking Kit - SEARS ITEM# 18004
White Pedestal - SEARS ITEM# 184121
IMPORTANT
See complete Installation Instruction manual before installing your
direct drain kit accessory.
IMPORTANT
See complete Installation instructions
manual before installing your dryer
power cord.
IMPORTANT
Do not place condenser in dishwasher for
cleaning.
Complete the ease of your installation with these accessories:
Understanding maintenance symbols on your dryer’s control panel:
Quickstart Guide for your new Kenmore
®
compact condensing dryer:
Installing the optional direct drain kit on
your new condensing dryer:
Locating terminal screws to install your
UL-approved power cord:
136938110A (1502)
Color matching storage pedestal. Stacking kit with pullout work tray. Drying rack.
Universal appliance wrench.
®
Clear drain tube
90 degree plastic elbow
Plastic zip tie
If the water container becomes full during
a drying cycle, the indicator will illuminate
and the dryer will stop. Empty and replace
the water container and restart the dryer.
Remove the lint trap and clean the lint from
the fi lter. If necessary, wash the fi lter screen
with warm water before replacing it back in
dryer.
Follow the complete instructions in your
Use & Care Guide for safe removal of the
condenser. Rinse condenser in sink. Clean
with mild soap and water if necessary.
Return condenser before restarting the dryer.
Red tube from
inside dryer
Mounting clamp
Wrench - P/N 137019200
Drying Rack - P/N 916093163
Empty Water Container Clean Lint Trap Clean Condenser
NOTE
It is a good practice to empty the water container
after each cycle.
Terminal screws were shipped from the factory
temporarily attached inside the access cover.