Manual

CAREAND CLEANING
Self-CleaningCycle
(UpperOven)
The Clean Cycle, including cooldown
time, is automatically set for 4 hours,
but you may change this from 3 hours
if oven is lightly soiled, up to 5 hours if
oven is heavily soiled.
1. Press the CLEAN
pad. 4 hours will
show in the display.
1_ (_ 2, If you want to
change the length of
HOUR MIN clean time press the
_ _ HOUR/MINUPand/or DOWN
arrow pads.
3. Press the
START pad.
Simply press the CLEAR/OFF pad.
You will need to wait for the oven
temperature to drop below the lock
temperature (approx. 1 hour) before
attempting to open the door.
After the cycle, you may notice some
white ash in the oven. Just wipe it up
with a damp cloth or sponge.
If white spots remain, scrub them
with a soap-filled steel wool pad. Be
sure to rinse thoroughly. These are
usually deposits of salt that cannot
be removed during the cycle.
If for any reason you are not
satisfied with the cleaning
results, just repeat the cycle.
HOUR MIN
@@
HOUR MIN
@@
1. Press the
CLEAN pad.
2. If you want to
change the length
of clean time
press the
HOUR/MIN UP
and/or DOWN
arrow pads.
3, Press the DELAY
START pad.
4. Press the HOURI
MIN UP and/or
DOWN arrow
pads to set the
time you prefer the
clean cycle to
start.
5. Press the
START pad.
18