Manual

CAREANg CLEANING
Self-CleaningCycle
(UpperOven)
TheCleanCycle, including cooldown
time, offerspreset optTonsof 3, 4 or 5
hours,but you may changethis to any
tTmebetween3 and 5 hours.
1. For3 hours:Pressthe
SELECTCLEAN pad, 3
hoursand "Lo" will show
in the display. Thissetting
is recommendedfor
small contained spills. Go
to step 3 and press the
STARTpad.
For 4 hours: Press
the SELECTCLEAN pad
two times. 4 hours and
"Std" will shawin the
display. Thissetting is
recommended fora
normallysoiled oven.
Go to step 3 and press the
STARTpad.
For 5 hours:Press
theSELECTCLEAN pad
three times. 5 hoursand
"HI" will show inthe
display. Thissetting is
recommendedfor heavily
soiled ovens. Go to
step 3 and press the
STAR1"pad.
(_) (_ 2. If you wantto change the
lengthof clean time, press
the HOURiMINUP and/or
_.. DOWNarrowpads.
<_)3. PresstheSTART pad.
Simply press the CLEAR/OFF pad. You
wil! need to watt for the oven temperature
to drop below the lock temperature
(approx. 1 hour) before attempting to
open the door.
After the cycle, you may notice some
white ash in the oven. Just wipe it up
with a damp cloth or sponge.
If white spots remain, scrub them
with a soap-filled steel wool pad. Be
sure to rinse thoroughly. These are
usually deposits of salt that cannot
be removed during the cycle.
If your oven is equipped with porcelain
oven racks, it will be necessary to
grease the edges with a light coating
of vegetable oil after the clean cycle.
This wilt help maintain the ease of
sliding the racks in and out of the oven.
If for any reason you are not
satisfied with the cleaning results,
just repeat the cycle,
1. Pressthe SELECT
CLEANpad and choose
theclean levelof either
Lo(3 hours),Std (4
hours)or Hi (5 hours).If
oneof these isyour
choTce,go tostep 3 and
set the delay starttime.
@ @ 2. If youwantto ehange the
lengthof clean time,
press theHOUR/MINUP
_,,o.,,,._=, and/or DOWNarrow
pads.
3. Pressthe DELAY
STARTTIMEpad.
@ @ 4. Pressthe HOUR/MINUP
and/or DOWNarrow
pads to setthetimeyou
_.'_,,"_ preferthe clean cycle te
start.
<_5. PresstheSTART pad.
21
20P306-2 ENv01 2/14_03, 3:57 PM