Manual

"DO-IT-YOURSELF" OVEN TEMPERATURE ADJUSTMENT
You may feel that your new oven cooks differently than
the oven it replaced. We recommend that you use your
new oven a tew weeks to become more familiar with it,
following the times given In your recipes as a guide.
Your oven has been preset to maximize cooking
efficiency. If you think your new oven Is too hot
(burning foods), or not hot enough (foods are under-
cooked) you can adjust the temperature yourself. The
appearance and texture of foods is a better Indicator of
oven accuracy than an inexpensive oven thermometer.
We do not recommend the use of inexpensive
thermometers_ such as those found in the grocery
store, to readjust the temperature setting of your
new oven= These thermometers can vary by 20°-40°F.
Also, you must open the oven door to read the
thermometer and this changes the temperature of the
oven.
To decide how much to change the temperature, set the
oven temperature 25°F higher (If foods are under-
cooked) or 25°F lower (If foods are burning) than the
temperature In your recipe, then bake. The results of
this "test" should give you an Idea of how much the
temperature should be changed.
To adjust temperature follow these instructions:
Hml
1. Press the BAKE pad.
BAKE
2. Press the UP arrow pad to select a temperature
between 500°F and 550°F.
4. Use the UP or DOWN arrow pad to select the
temperature adjustment you want.
The temperature can be adjusted up to +35°F hotter
or -35°F cooler.
TEMPERATURE ADJUSTMEN'[
YOU HAVE SELECTED IS
SHOWN IN THE DISPLAY
5. When you have made the adjustment, push the
CLOCK pad to return the display to the time of day.
Use your oven as you would normally,
I CLOCK !
NOTE: This adjustment will not affect Broil or
Clean temperatures, it will be remembered
when power is removed,
Adjusting the thermostat of one oven will not
affect baking performance in the other oven.
Each oven must be adjusted separately.
Continue tohold the BAKE pad untllthe display changes
to show the preset oven display.
PRESET OVEN DISPLAY
3. IMMEDIATELY, press the BAKE pad again and hold
for about 4 seconds° This display will show "ON" and
"BAKE" will flash in the display,
17 NESER95