Manual

CAREANDCLEANING
Self.Cleaning Cycle
The Clean Cycle, _ncluding coot down
time, offers preset options of 3, 4 or 5
hours, but you may change this to any
time between 3 and 5 hours.
I. or 3 hours: Press the
SELECT CLEAN pad. 3
hours and "Lo" will show fn
the display. This setting _s
recommended for small
contained spills. Go to step 3
and press the START pad.
For 4 hours: Press the
SELECT CLEAN pad two
times. 4 hours and "Std"
will show tn the display. This
setting is recommended for a
normally soiled oven. Go to
step 3 and press the START
pad.
For 5 hours: Press the
SELECT CLEAN pad three
times. 5 hours and "Hi" will
show _nthe display. This
setting _srecommended
tot heavily soiled ovens.
Go to step 3 and press the
START pad.
(_) _ 2, If you want to change the
length of clean time, press the
HOUR/MIN UP and/or DOWN
_,_. arrow pads.
<_3, Press the START pad.
The door rocks automatically. The display
wilt show the clean time remaining. It will
not be possible to open the oven door
until the temperature drops below the lock
temperature and the LOCKED light goes
off. When the LOCKED light is off, open
the door. The word LOCKED will flash and
the oven contro! will s_gnaf if you set the
clean cycle and forget to close the oven
door.
Simply pressthe CLEAR/OFF pad. You
will need to wail tot the oventemperature
to drop below the lock temperature
(approx. 1 hour) before attempting to
openthe door.
After the cycle, you may notice some
white ash _nthe oven. Just wipe _tup with
a damp cloth or sponge.
If white spots remain, scrub them with a
soap-filled steel wool pad. Be sure to
nnse thoroughly. These are usually
deposits el salt that cannot be removed
dunng the cycle.
If your oven _sequipped with porcetam
oven racks, it wiJl be necessary to grease
lhe edges with a light coating or
vegetable of! alter the clean cycle. This
will help maintain the ease ot sliding the
racks _nand out ot the oven.
If for any reason you are net satisfied
with the cleaning results, just repeat
the cycle.
QG 2.
@@4.
22
Press theSELECT
CLEAN pad and choose
theclean level ot either Lo
(3 hours),Std (4 hours) or Hi
(5 hours).If one of these=s
your choice, go to step 3
and set the delay startt=me.
If youwant to change the
lengthof clean t_me,press
the HOUR/MINUP and/or
DOWNarrow pads.
Pressthe DELAYSTART
TIME pad,
Press the HOUR/MIN UP
and/or DOWN arrow pads to
set the time you prater the
clean cycle to start.
Press the START pad.