Manual

OPERATION
OvenControl,Clockand Timer
Your new control has a series of tones
that will sound at different times,
These tones may sound while you set
the control for an oven function, or at
the end of the oven function, It will also
alert you that there may be a problem
with the functions, Be$oware the types
ot tones and a brief description of
each.
TONES WHILE SETTING THE
CONTROL- When you press a touch
pad you wil! hear a beep. This beep
will let you know you have placed
enough pressure on the pad to activate
m (The arrow pads do not beep,)
END OF TIMED CYCLE TONE - At
the end ot a timed cooking function.
you will hear 3 short beeps followed
by 1 beep every 6 seconds. Thfs 6
second beep will contJnue to sound
until the CLEAR/OFF pad Js pressed
or you may select the special feature
to cancel this 6 second beep from
sounding at the end of future cycles,
TO CANCEL THE 6 SECOND BEEP
1. Press and hold the BAKE and
BROIL pads, at the same time for
3 seconds, until the display shows
"SF."
2. Press the KITCHEN TIMER pad.
The display wilt show "CON
DEEP" (continuous beep).
3. Press the KITCHEN TIMER pad
again. The display wilt show
"BEEF" (beep canceled)_
4. Press the START pad to cancel
the 6 second beep and leave the
spec_at teature mode.
If you would like to return the 6 second
beep, repeat steps above until the
disptay shows your choice and press
the START pad.
ATTENTION TONE - Th_stone will
sound if you make an error or an
oversight Jsmade white setting an
oven function,
Examples would be:
a. Setting a clean cycle and the oven
door _snot properly closed.
b. Setting lunction and not pressing
the START pad,
c, Pressrng an additional function pad
without first setting a temperature
or time,
Any of these can be quickly identified
by watch]ng the display.
PREHEAT TONE - When you
select a cooking mode, set an oven
temperature and press the START
pad, the oven starts to heat. When the
temperature _ns_dethe oven reaches
the temperature you have set, a tone
will sound to let you know the oven _s
ready tot baking,
If the control beeps while the display
{s showing "F" and a number or letter
such as "F4" or "FI" there may be a
problem with the control or oven.
Simply press the CLEAR/OFF pad
and wa_tabout an hour. Try setting the
tunction again, If the code repeats,
write down the ftash_ng code and call
tot serwce, Tail the technician what
code was flashing.