Use and Care Manual

- 18 -
2. Lift the rubber retainer and pull out motor
safety filter as shown.
3. Wash filter in warm soapy water, rinse,
then dry. Do not clean in dishwasher or
install while damp.
4. Slide the filter back into place under the
ribs in the bag cavity. Tuck filter in so that
it fits completely under the rubber retainer.
5. Replace the bag as outlined in the DUST
BAG CHANGING (page 17) section.
MOTOR SAFETY FILTER CLEANING
MOTOR SAFETY FILTER
Check motor safety filter occasionally and
clean when dirty.
NOTE: See REPLACEMENT PARTS for part
number and purchase details (page 5).
1. Remove the bag as outlined in the DUST
BAG CHANGING (page 17) section.
WARNING
Electrical Shock Hazard
Turn off and unplug vacuum cleaner from
electrical outlet. Do not operate the
vacuum cleaner without the motor safety
filter. Be sure the filter is dry and properly
installed to prevent motor failure and/or
electrical shock.