Owner's Manual

Installation

1. Remove the mounting screws attaching the foot pedal to the

compactor. Remove foot pedal.

2. Remove mounting screws attaching the toe guard to the

compactor. Remove toe guard.

3. Remove the mounting screws attaching the decorative panel

to the compactor. Remove decorative panel and discard

mounting screws.

4. Align the bottom of the custom panel with the bottom of the

drawer front.

5. Secure the custom panel from the back using 4 - #8 x 1"

wood screws as shown.

6. Attach a 15" (38.1 cm) x ¹⁄₂" (1.3 cm) quarter-round filler

along the top of the drawer front using glue or screws.

7. Reinstall the toe guard using the existing mounting screws

and ¹⁄₂" washer. Then, reinstall the foot pedal.

A. Mounting screws

B. Foot pedal

A. Custom panel

B. 15" (38.1 cm)

x ¹⁄₂" (1.3 cm) quarter-round

C. Panel screw locations

D. Toe guard

E. Washer

F. Toe guard mounting screw